E4405 Cmd Rej: OPTSN GTT set type is not compatible with GTTSN set type

If the GTT set specified by the gttsn parameter (GTTSN set) has a set type of cdgta (see the ent-gttset command), then the optsn parameter cannot specify a GTT set (OPTSN set) with a set type of cgssn. The OPTSN set must have a set type of cggta or cgpc.

The FLOBR feature must be turned on before a GTTSN set with a set type of cgpc, cggta, or opc can be specified with an OPTSN with a set type other than cgssn.

If the FLOBR feature is turned on, and the GTTSN set has a set type of cdgta or cdssn, then the OPTSN set cannot have a set type of opc.

If the TOBR feature is turned on, and the GTTSN set has a set type of opcode, then the OPTSN set cannot have a set type of opc.

If the GTTSN set has a MAP Based Routing (MBR) set type (imei/imsi/vlrnb/msisdn/smrpda/smrpoa), then the OPTSN set type cannot have the same set type as GTTSN.

If the OPTSN set has a MAP Based Routing (MBR) set type (imei/imsi/vlrnb/msisdn/smrpda/smrpoa), then the GTTSET must have a MBR or opcode set type.

Recovery

1. Display the set type information. Enter the rtrv-gttset command.
2. Display the status of the FLOBR and TOBR features. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
3. Revise the configurations and turn the FLOBR feature on as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
4. Re-enter the ent/chg-gta command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for more information.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).