1. Database Administration - GWS User's Guide
  2. Gateway Screening (GWS) Overview
  3. User Interface Requirements
  4. Command Summary

Command Summary

This section briefly describes each type of command used in this chapter. There are four commands for each screening function. One to enter the screening information (ent), one to change the screening information after it has been entered (chg), one to delete screening information (dlt), and one to display the screening information (rtrv).

If the command is not accepted, a “Command Rejected” message is displayed. If the command is accepted, a time stamp and a “Command Completed” message is displayed. For example: 

E2361 Cmd Rej: Screen set name not defined

or 

rlghncxa03w 06-10-25 15:25:30 GMT  EAGLE5 36.0.0
ENT-SCR-OPC: MASP A - COMPLTD

Any time a screen set is affected by a command (for example, an entry is added to, removed from, or changed in the screen set) a “Screen Set Affected” message is displayed indicating the percentage of memory that screen set occupies (100% = the maximum space available). This information is useful in determining how “full” the screen set is at any given time. The percentages are calculated after the command is executed. For example, the output message, ENT-SCR-OPC: SCREEN SET AFFECTED - SS01 25% FULL, indicates that after an entry was added to screen set SS01 by the ent-scr-opc command, it occupied 25% of the maximum space available. The following is an example of the output that can be received when a screen set is affected. 

Extended Processing Time Required -- Please Wait
Notice: The number of screensets affected is   2.
ENT-SCR-OPC: SCREEN SET AFFECTED - ss01 25% FULL
ENT-SCR-OPC: SCREEN SET AFFECTED - ss04 35% FULL
ENT-SCR-OPC: MASP A - COMPLTD

When a new screen set is created it immediately occupies space which may or may not be over the allowed limit. The user must know how much space has been occupied by the new screen set. For example, if the screen set SCR1 is created, the output of the ent-scrset command has the following format: 

Extended Processing Time Required -- Please Wait
Notice: The number of screensets affected is   1.
ENT-SCRSET: SCREEN SET AFFECTED - scr1   95% FULL
ENT-SCRSET: MASP A - COMPLTD

Note:

A screen set can be over 100% full, but it is not recommended that the screen set remain in this condition. The gateway screening process will not function properly using a screen set that is over 100% full. Some entries must be removed from the screen set to reduce the screen set capacity to 100% or below.