Removing a GLS Card
This procedure is used to remove GLS cards, used by
gateway screening, from the database using the
dlt-card
command. The card cannot be
removed if it does not exist in the database.
Caution:
If the GLS card is the last GLS card in service, removing this card from the database will disable the Gateway Screening feature.The examples in this procedure are used to remove the GLS card in card location 1205.
Canceling the
REPT-STAT-CARD
Command
Because the
rept-stat-card
command used in this
procedure can output information for a long period of time, the
rept-stat-card
command can be canceled
and the output to the terminal stopped. There are three ways that the
rept-stat-card
command can be
canceled.
- Press the
F9
function key on the keyboard at the terminal where therept-stat-card
command was entered. - Enter the
canc-cmd
without thetrm
parameter at the terminal where therept-stat-card
command was entered. - Enter the
canc-cmd:trm=<xx>
, where<xx>
is the terminal where therept-stat-card
command was entered, from another terminal other that the terminal where therept-stat-card
command was entered. To enter thecanc-cmd:trm=<xx>
command, the terminal must allow Security Administration commands to be entered from it and the user must be allowed to enter Security Administration commands. The terminal’s permissions can be verified with thertrv-secu-trm
command. The user’s permissions can be verified with thertrv-user
orrtrv-secu-user
commands.
For more information about the
canc-cmd
command, go to
Commands User's Guide.
Figure 2-15 Remove a GLS Card