0153 - STPLAN Not Available

This message indicates that no application communication modules (ACMs) are in service.

Example

RLGHNCXA21W 00-12-07 11:02:30 EST  EAGLE 35.0.0
*C 0100.0153 *C SLAN SYSTEM      STPLAN not available

Alarm Level: Critical

Recovery

1. To determine the status of the ACMs, enter:
   rept-stat-slan
   Example of the output:

   tekelecstp 00-04-23 13:36:07 EST EAGLE 35.0.0
   SLAN Subsystem Report  IS-ANR         Active     -----
   SLAN Cards Configured= 2      Cards IS-NR= 2
   CARD   VERSION      PST            SST       AST    HOST Cap.  EAGLE Cap.
   -------------------------------------------------------------------------
   1206   021-010-000  IS-NR          Active    ----       42%         16%
   1104   021-010-000  IS-NR          Active    ALMINH     36%         12%
   -------------------------------------------------------------------------
   AVERAGE USAGE per HOST CAPACITY  =  39%
   AVERAGE USAGE per EAGLE CAPACITY =  14%
   CARDS DENIED SLAN SEVICE:
     1101, 1204
   Command Completed.

2. Use the init-card command to reinitialize any cards OOS-MT.
3. Enter the following command to determine if the card(s) have returned to IS-NR.
   If not, reseat the card(s).rept-stat-slan
4. If any card(s) remain OOS-MT, replace the card(s).
   Refer to the Maintenance Manual, Appendix A, Card Removal/Replacement Procedures.