Unsolicited Alarm and Information Messages Reference

1084 - GWS MSU discarded by redirect function

This message indicates that an MSU has been discarded rather than redirected to the SCP as part of the Database Transport Access (DTA) feature.

Example

RLGHNCXA21W 00-04-18 19:12:00 EST  EAGLE 31.3.0
0003.1084    CARD 1205,A   INFO   GWSMSU discarded by redirect function SIO=01 OPC=003-237-002 DPC=006-006-000
SR=scrb
LSN=A1234567

Note:

Four outputs are possible. The Legend includes abbreviations found in all variations.

Legend

ADDR: Address
AFTPC: Affected point code (for SCCP messages)
AFTSS: Affected subsystem (identifies the subsystem that failed)
AI: Address Indicator
CDPA: Called party address
CGPA: Calling party address
DATA: Information from the upper layers of SCCP management
DPC: Destination point code
H0H1: H0/H1 heading code
LSN: Linkset name. The name must be unique.
MULT: SCCP management message multiplicity indicator
OPC: Origination point code
PC: Point code for the SS7 end user (OPC).
SCCP MT: SCCP message type
SCMG: SCCP management message
SIO: Service information octet
SR: Screening reference name
SSN: Subsystem number
TN: Telephone number
TYPE: SCCP management message type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Check to see if the redirect function is disabled by entering the following: rtrv-gws-redirect
If the enabled parameter is set to OFF as in the following output, the redirect function needs to be enabled.
```
RLGHNCXA03W 00-02-10 11:43:04 EST EAGLE 35.0.0
ENABLED DPC RI SSN TT GTA
 
off 001-030-001 GT 10 25 1800833
```
Enter the following command to enable the redirect function: chg-gws-redirect:enabled=on