Unsolicited Alarm and Information Messages Reference

1130 - IS412GSM not provisioned

The GSMOPTS: IS412GSM digits have not been provisioned.

To be able to perform the IS-41 GSM Migration feature and to accept LOCREQ Request messages, first specify the IS412GSM prefix in GSMOPTS.

Example

This output indicates an error against the original destination rather than the redirected destination.

RLGHNCXA21W 08-01-13 16:20:19 EST  EAGLE 37.5.0
0712.1130    CARD 1105     INFO    IS412GSM not provisioned
                 SIO=83   OPC=   00100          DPC=   00456
                 SCCP MSG TYPE=09
                 CDPA:  NI=0  RI=0  GTI=04  SSNI=1  PCI=1
                        TT=010  NP=01  NAI=004  ADDR=19876543210
                        PC=   08238          SSN=010
                 CGPA:  NI=0  RI=1  GTI=00  SSNI=0  PCI=0
                        PC=--------------    SSN=---
                 LSN=ls1
                 Report Date:08-01-13  Time:23:20:02

This alternate output includes the redirected destination and is used when a redirected MSU encounters an error.

RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0712.1130    CARD 1105     INFO    IS412GSM not provisioned
                 SIO=03   OPC=001-001-001      DPC=002-002-002
                 SCCP MSG TYPE=04
                   GTT on CdPA used MOSMSGTA=9193802053
                 CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                        TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                        PC=003-003-003       SSN=005
                 CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                        TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                        PC=001-001-001       SSN=004
                 LSN=ABCD123  GTTSET=3 203 46
                 Report Date:02-07-21  Time:16:20:19

Legend

ADDR: Address
CDPA: Called party address
CGPA: Calling party address
DPC: Destination point code
GTI: Global title indicator
LSN: Linkset name. The name must be unique.
MSG TYPE: Message type
NAI: Nature of address indicator
NI: Network indicator value
NP: Numbering plan
OPC: Origination point code
PC: Point code for the SS7 end user (OPC).
PCI: Protocol control information
RI: Routing indicator
SIO: Service information octet
SSN: Subsystem number
SSNI: Subsystem number indicator
TT: Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Enter the rtrv-gsmopts command to display the IS412GSM setting in the GSM System Options.

Example of the output:

rlghncxa03w 03-05-20 09:04:14 EST  EAGLE 30.1.0
    GSM OPTIONS
    -----------------------
    DEFMCC      = NONE
    DEFMNC      = NONE
    SRFADDR     = 123456789abcdef
    MSRNDIG     = RN
    DEFMAPVR    = 1
    SRIDN       = TCAP
    IS412GSM    = 0123456789abcde
    
    rlghncxa03w 03-03-20 09:04:14 EST  EAGLE 30.1.0
    SRFADDR=123456789abcdef    SRFNAI=7    SRFNP=15
    MSRNDIG=CCRNDN
    MSRNNAI=7    MSRNNP=15 DEFMAPVR=2

This example shows a setting supporting the IS-41 LOC Request message.

If the IS412GSM parameter is not specified, proceed to Step 2. However, if it is set with a valid value, proceed to Step 3.

Use the chg-gsmopts command to specify the IS-41 to GSM migration prefix.

Refer to the Commands Manual for details. Then re-issue the command that caused this UIM.
If the problem persists with the IS412GSM parameter specified, contact My Oracle Support (MOS).