1443 - GTT Action Failed to Send TCAP Error

This UIM indicates that the TCAP error action could not generate a TCAP error response due to any failure in decoding TCAP.

Example

6054.1443    CARD 1101     INFO    GTT Action FAILED TO SEND TCAP ERROR
           OPC=   1-001-4        DPC=   1-001-5
           CDPA:  NI=0  RI=0  GTI=02  SSNI=1  PCI=1
                  TT=010  NP=--  NAI=---  ADDR=9818316478
                  PC=   1-001-1        SSN=016
           CGPA:  NI=0  RI=0  GTI=02  SSNI=1  PCI=1
                  TT=011  NP=--  NAI=---  ADDR=9910929095
                  PC=   1-002-3        SSN=049
           Op-Code=--- Action Set=tcapset
           Report Date:03-01-03  Time:16:55:23

Legend

ADDR

Address

CDPA

Called party address

CGPA

Calling party address

GTI

Global title indicator

LSN

Linkset name. The name must be unique.

MSG TYPE

Message type

NAI

Nature of address indicator

NI

Network indicator value

NP

Numbering plan

OPC

Origination point code

OP-CODE

Operation Code

PARAM

Parameter

PC

Point code for the SS7 end user

PCI

Protocol control information

RI

Routing indicator

SSN

Subsystem number

SSNI

Subsystem number indicator

TT

Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery:

Do just one of the following to fix the problem:

1. Correct the TCAP Portion.
2. Disassociate “TCAP Error” GTT Action from the GTT Translation.
3. Change the “TCAP ERROR” action to either “UDTS” or “DISCARD” GTT Action.