1078 - GTT Action Duplicate Failed

This UIM indicates that the EAGLE 5 ISS failed to route or prepare Duplicate MSU for the reason indicated in the UIM.

Example

6618.1078    CARD 1105     INFO    GTT Action DUPLICATE FAILED
             OPC=   1-001-4        DPC=   001-001-002
             CDPA:  NI=0  RI=0  GTI=02  SSNI=1  PCI=0
                    TT=200  NP=--  NAI=---  ADDR=123456
                    PC=--------------    SSN=005
             CGPA:  NI=0  RI=0  GTI=02  SSNI=0  PCI=1
                    TT=010  NP=--  NAI=---  ADDR=234567
                    PC=--------------    SSN=---
             Op-Code=--- Action Set=aset1
             Cause=CLG PC Conv fail
             Report Date:03-04-27  Time:07:42:09

Legend

ADDR

Address

CDPA

Called party address

CGPA

Calling party address

GTI

Global title indicator

LSN

Linkset name. The name must be unique.

MSG TYPE

Message type

NAI

Nature of address indicator

NI

Network indicator value

NP

Numbering plan

OPC

Origination point code

OP-CODE

Operation Code

PARAM

Parameter

PC

Point code for the SS7 end user

PCI

Protocol control information

RI

Routing indicator

SSN

Subsystem number

SSNI

Subsystem number indicator

TT

Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery:

The cause of the error is included as a reason string in the UIM. Refer to the following table for the recovery steps:

Table 3-7 Error Recovery

Cause	Recovery
CDPA GTMOD Failure	CdPA GT Modification failed resulting in Forward action failure. Correct the GT Modification data in CDGTMODID associated with the GTT Action.
CGPA GTMOD Failure	CgPA GT Modification failed resulting in Forward action failure. Correct the GT Modification data in CGGTMODID associated with the GTT Action.
Encoding Failure	Encoding of forward MSU failed resulting in Forward action failure. The True PC for the DPC or EAGLE for destination Network must be configured AND/OR The SCCP data (GTI/SSN) must be corrected such that the message length does not exceed the Maximum MSU length limit.
MAP Lookup Failure	Error in MAP load sharing caused Forward action failure. Configure the DPC/SSN displayed in UIM within the MAPSETID associated with GTT Action. OR Configure correct MAP SETID (which contains the DPC/SSN displayed in UIM) in GTT Action entry.
Routing Failure	Error in routing the forward MSU caused Forward action failure. The route for DPC must be provisioned and at least one route to the DPC must be available.
DFLT GT Conv Failure	Default GT conversion failed while creating Forward MSU. Provision correct Default GT Conversion data for successful network conversion of the MSU.
CLG PC Conv fail	Error in conversion of Calling PC. Provision correct Conversion data for Calling PC for successful network conversion of the MSU.
Unknown Error	Error in creating Forward MSU for any other reason. Correct the data associated with Forward GTT Action.