1446 - XUDT UDT conversion failed

The conversion from XUDT to UDT (or UDT to XUDT) failed, and the message was routed without the XUDT UDT conversion. Depending on which features are applied after XUDT UDT conversion, other processing of the message may occur after the failed XUDT UDT conversion.

Example

0018.1446    CARD 1103,A     INFO    XUDT UDT conversion failed
        SIO=03   OPC=001-001-001      DPC=002-002-002
           SCCP MSG TYPE=04
           CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                  TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                  PC=003-003-003       SSN=005
           CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                  TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                  PC=001-001-001       SSN=004
           LSN=ABCD123  GTTSET=3 203 46
           Report Date:10-06-14  Time:16:20:19

Legend

ADDR

Address

CDPA

Called party address

CGPA

Calling party address

DPC

Destination point code

GTI

Global title indicator

GTTSET

GTT Set Index

LSN

Linkset name. The name must be unique.

MSG TYPE

Message type

NAI

Nature of address indicator

NI

Network indicator value

NP

Numbering plan

OPC

Origination point code

PC

Point code for the SS7 end user (OPC).

PCI

Protocol control information

RI

Routing indicator

SIO

Service information octet

SSN

Subsystem number

SSNI

Subsystem number indicator

TT

Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Refer to the following to correct the problem:

• Database Administration Manual - Global Title Translation
• The ent/chg/rtrv-dstn commands in the Commands Manual

manual to correct the problem.