The following example shows a possible system
response when a specified DSM card is queried with the
rept-stat-mps
command.
rept-stat-mps:loc=1205
rlghncxa03w 01-03-07 10:23:93 EST EAGLE 35.0.0
CARD VERSION TYPE PST SST AST
1205 ----------- DSM OOS-MT-DSBLD Manual -----
DSM PORT A OOS-MT Unavail -----
ALARM STATUS = ** 0084 IP Connection Unavailable
DSM PORT B OOS-MT Unavail -----
ALARM STATUS = ** 0084 IP Connection Unavailable
INP STAT = -------
CARD ALARM STATUS = No Alarms.
DSM MEMORY USAGE = 0%
Command Completed.
Determine from the output whether the MPS is active
and available for service. If it is not, refer to the
ELAP Administration and LNP Feature
Actiivation or
EPAP Administration Manual about restoring
an MPS server to the active state.