0321 - X-LIST occupancy threshold exceeded

This message indicates that the number of x-list entries has exceeded a specified threshold.

Example

   RLGHNCXA21W 00-12-07 12:01:43 EST  EAGLE 35.0.0 
*  0014.0321  *  XLIST             X-LIST occupancy threshold exceeded

Alarm Level: Minor

Recovery

1. To display the system-wide parameters for cluster routing, enter the command:
   rtrv-stpopts
   Example of the output:

   RLGHNCXA03W  00-07-23  16:02:34 EST  EAGLE. 31.3.0   STP OPTIONS
   -------------------------
   MTPT31CTL               1
   MTPLT1                yes
   MTPLTCTDPCQ             3
   MTPLTST             10000
   MTPXLQ                500
   MTPXLET              0100
   MTPXLOT               90%
   MTPDPCQ              2000
   TFATFRPR             1000
   MTPRSI                yes
   MTPRSIT              5000
   

   The mtpxlq parameter is the total number of dynamic status exception list (x-list) entries the EAGLE 5 ISS maintains. There are 2500 total table entries. The default values allow for 2000 entries for provisioned destinations and 500 for x-list entries. (If you increase the number of x-list entries, you must decrease the number of DPCs that can be provisioned by changing the mtpdpcq parameter.) The mtpxlet parameter is the maximum amount of time the EAGLE 5 ISS maintains an unreferenced x-list entry. The mtpxlot parameter is the threshold that this message refers to.
2. Use the chg-stpopts to change the number of x-list entries, the x-list expiration timer, or to raise the threshold for notification of a full x-list.
3. If the problem persists, use the dact-rstst command to eliminate specific x-list entries.