Refer to the following section for details on configuration parameters.
Route One Configuration
Property Name |
Property Value |
Description |
Remarks |
Configuration File: ro_servlet_init.conf |
|||
LOSApplicationRequestServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationRequestService |
URL for OFSLL New application WebService |
Refer the recommended context root table for CONTEXT ROOT. |
LOSApplicationUpdateServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationUpdateService |
URL for OFSLL application update WebService |
Refer the recommended context root table for CONTEXT ROOT. |
LOSeContractWebServiceServiceURL |
http://<localhost>:<port>/dbkls-xws-app-ro/LOSEContractService |
URL to validate and receive the contract information |
Refer the recommended context root table for CONTEXT ROOT. |
keystoreLocation |
config/dls_cacerts |
Parameter to set keystore location |
The keystore location should not be changed and keystore should be available in this location |
postURL |
https://messaging.itl.routeone.net/IF1_ITL/CASSBMessagingReceiver |
URL for posting acknowledgement message to Route one |
Verify the URL with Route One |
fileLocation |
/tmp |
temporary file directory |
The directory for temporary files. Make sure that such directory exists on the deployment server |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xae_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
applicationSource |
ROUTEONE |
Parameter to set application source |
Don't modify this value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
fileDelimiter |
, |
Delimiter used in dealer header file |
Needed only for RouteOne |
jndiLookupDataSource |
jdbc/IN1HukWznG0b4esj |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xec_init.conf |
|||
jndiLookupDataSource |
jdbc/IN1HukWznG0b4esj |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
Configuration File: dbkws_xcl_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
fileDelimiter |
, |
Delimiter used in dealer header file |
|
jndiLookupDataSource |
jdbc/dbk105nlEJBDS |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
sscroKeyAlias |
ofss_routeone |
OFSLL's private key alias name. The private key is used to sign xml response to RouteOne |
You may import the private key with alias "ofss_routeone" else modify the property value to alias used while importing the private key into keystore. |
sscroKeyPassword |
demotestSSCR1 |
OFSLL's private key password |
demotestSSCR1 is a sample value |
Configuration File: Logging.properties |
|||
handlers |
java.util.logging.FileHandler, java.util.logging.ConsoleHandler |
|
|
java.util.logging.FileHandler.level |
ALL |
|
|
java.util.logging.FileHandler.pattern |
/somewhere/logs/dbkls_xws_%g.log |
|
|
java.util.logging.FileHandler.limit |
1000000 |
|
|
java.util.logging.FileHandler.count |
4 |
|
|
java.util.logging.FileHandler.append |
true |
|
|
java.util.logging.FileHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
java.util.logging.ConsoleHandler.level |
WARNING |
|
|
java.util.logging.ConsoleHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
com.ofss.fll.xws.level |
FINER |
set the logging level for the application |
Other Level values -- FINEST,FINE,CONFIG and INFO |
Dealer Track
Property Name |
Property Value |
Description |
Remarks |
Configuration File: dt_servlet_init.conf |
|||
LOSApplicationRequestServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationRequestService |
URL for OFSLL New application WebService |
Refer the recommended context root table for CONTEXT ROOT. |
LOSApplicationUpdateServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationUpdateService |
URL for OFSLL application update WebService |
Refer the recommended context root table for CONTEXT ROOT. |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xae_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
applicationSource |
DEALERTRACK |
Parameter to set application source |
Don't modify this value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
jndiLookupDataSource |
jdbc/IN1HukWznG0b4esj |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xcl_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
fileDelimiter |
, |
Delimiter used in dealer header file |
Needed only for RouteOne |
jndiLookupDataSource |
jdbc/dbk105nlEJBDS |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
sscroKeyAlias |
ofss_routeone |
OFSLL's private key alias name. The private key is used to sign xml response to RouteOne |
You may import the private key with alias "ofss_routeone" else modify the property value to alias used while importing the private key into keystore. |
sscroKeyPassword |
demotestSSCR1 |
OFSLL's private key password |
demotestSSCR1 is a sample value |
Configuration File: Logging.properties |
|||
handlers |
java.util.logging.FileHandler, java.util.logging.ConsoleHandler |
|
|
java.util.logging.FileHandler.level |
ALL |
|
|
java.util.logging.FileHandler.pattern |
/somewhere/logs/dbkls_xws_%g.log |
|
|
java.util.logging.FileHandler.limit |
1000000 |
|
|
java.util.logging.FileHandler.count |
4 |
|
|
java.util.logging.FileHandler.append |
true |
|
|
java.util.logging.FileHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
java.util.logging.ConsoleHandler.level |
WARNING |
|
|
java.util.logging.ConsoleHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
com.ofss.fll.xws.level |
FINER |
set the logging level for the application |
Other Level values -- FINEST,FINE,CONFIG and INFO |
EDOCS
Property Name |
Property Value |
Description |
Remarks |
Configuration File: ds_servlet_init.conf |
|||
LOSeApplicationRequestServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSeApplicationRequestService |
URL for OFSLL eDocs Create/update application WebService |
Refer the recommended context root table for CONTEXT ROOT. |
LOSApplicationCommentUpdateServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationCommentUpdateService |
URL for OFSLL eDocs comment update WebService |
Refer the recommended context root table for CONTEXT ROOT. |
LOSApplicationLocationUpdateServiceURL |
http://<HOST NAME>:<PORT>/<CONTEXT ROOT>/LOSApplicationLocationUpdateService |
URL for OFSLL eDocs location update WebService |
Refer the recommended context root table for CONTEXT ROOT. |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xae_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
applicationSource |
EDOCS |
Parameter to set application source |
Don't modify this value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
jndiLookupDataSource |
jdbc/IN1HukWznG0b4esj |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xcl_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
fileDelimiter |
, |
Delimiter used in dealer header file |
|
jndiLookupDataSource |
jdbc/dbk105nlEJBDS |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
sscroKeyAlias |
ofss_routeone |
OFSLL's private key alias name. The private key is used to sign xml response to RouteOne |
You may import the private key with alias "ofss_routeone" else modify the property value to alias used while importing the private key into keystore. |
sscroKeyPassword |
demotestSSCR1 |
OFSLL's private key password |
demotestSSCR1 is a sample value |
Configuration File: Logging.properties |
|||
handlers |
java.util.logging.FileHandler, java.util.logging.ConsoleHandler |
|
|
java.util.logging.FileHandler.level |
ALL |
|
|
java.util.logging.FileHandler.pattern |
/somewhere/logs/dbkls_xws_%g.log |
|
|
java.util.logging.FileHandler.limit |
1000000 |
|
|
java.util.logging.FileHandler.count |
4 |
|
|
java.util.logging.FileHandler.append |
true |
|
|
java.util.logging.FileHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
java.util.logging.ConsoleHandler.level |
WARNING |
|
|
java.util.logging.ConsoleHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
com.ofss.fll.xws.level |
FINER |
set the logging level for the application |
Other Level values -- FINEST,FINE,CONFIG and INFO |
Webservices
Property Name |
Property Value |
Description |
Remarks |
Configuration File: dbkws_lookups_init.conf |
|||
jndiLookupDataSource |
jdbc/dbkwsDS |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set keystore location |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
Configuration File: dbkws_xae_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
jndiLookupDataSource |
jdbc/IN1HukWznG0b4esj |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
sscroKeyAlias |
ofss_routeone |
OFSLL's private key alias name. The private key is used to sign xml response to RouteOne |
You may import the private key with alias "ofss_routeone" else modify the property value to alias used while importing the private key into keystore. |
sscroKeyPassword |
demotestSSCR1 |
OFSLL's private key password |
demotestSSCR1 is a sample value |
postTimeout |
10 |
Parameter to set timeout value to post XML message to third party. |
Timeout value should be specified in number of seconds. |
useProxy |
0 |
Parameter to switch on/off proxy use. By default use of proxy is switched off. To use proxy setup value to "1", else setup value as "0" |
|
proxyHost |
abc.com |
Parameter to set proxy host. This is required if useProxy is set to 1. |
|
proxyPort |
80 |
Parameter to set proxy port. This is required if useProxy is set to 1. |
|
Configuration File: dbkws_xcl_init.conf |
|||
lenderId |
SOMELENDER_ID |
The finance source identifier used in the dealer file |
SOMELENDER_ID is a sample value |
lenderName |
SOME_LENDER_NAME |
The finance source name used in the dealer file |
SOME_LENDER_NAME is a sample value |
dealerElementName |
DEALER_DETAILS |
Name of XML element used for the dealer details used in the dealer file |
DEALER_DETAILS is a sample value |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
fileDelimiter |
, |
Delimiter used in dealer header file |
|
jndiLookupDataSource |
jdbc/dbk105nlEJBDS |
Parameter that defines the JNDI look up for the applicaton datasource |
|
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
sscroKeyAlias |
ofss_routeone |
OFSLL's private key alias name. The private key is used to sign xml response to RouteOne |
You may import the private key with alias "ofss_routeone" else modify the property value to alias used while importing the private key into keystore. |
sscroKeyPassword |
demotestSSCR1 |
OFSLL's private key password |
demotestSSCR1 is a sample value |
Configuration File: dbkws_xcs_init.conf |
|||
jndiLookupDataSource |
jdbc/dbkwsDS |
Parameter that defines the JNDI look up for the applicaton datasource |
Don't modify the value |
keystoreLocation |
config/dls_cacerts |
Parameter to set location for public/private key store for HTTPS posting and for XML Digital Signature |
The keystore location should not be changed and keystore should be available in this location |
keystorePassword |
changeit |
The keystore password |
The deafult password is "changeit". Modify the property in case the password is different for the keystore. |
fileLocation |
/tmp |
|
The directory for temporary files. Make sure that such directory exists on the deployment server |
applicationSource |
DBKTST |
Application source |
DBKTST is a sample value. Set it to appropriate value |
Configuration File: Logging properties |
|||
handlers |
java.util.logging.FileHandler, java.util.logging.ConsoleHandler |
|
|
java.util.logging.FileHandler.level |
ALL |
|
|
java.util.logging.FileHandler.pattern |
/somewhere/logs/dbkls_xws_%g.log |
|
|
java.util.logging.FileHandler.limit |
1000000 |
|
|
java.util.logging.FileHandler.count |
4 |
|
|
java.util.logging.FileHandler.append |
true |
|
|
java.util.logging.FileHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
java.util.logging.ConsoleHandler.level |
WARNING |
|
|
java.util.logging.ConsoleHandler.formatter |
java.util.logging.SimpleFormatter |
|
|
com.ofss.fll.xws.level |
FINER |
set the logging level for the application |
Other Level values -- FINEST,FINE,CONFIG and INFO |
System Parameters to be configured:
System Parameter Name |
System Parameter Desc |
XWS_XAE_DLR_TRACK_RESP_PWD |
DEALERTRACK APPLICATION RESPONSE BASIC AUTH PASSWORD |
XWS_XAE_DLR_TRACK_RESP_URL |
DEALERTRACK APPLICATION RESPONSE URL |
XWS_XAE_DLR_TRACK_RESP_USER |
DEALERTRACK APPLICATION RESPONSE BASIC AUTH USER |
XWS_XAE_DLR_TRACK_WS_URL |
OFSLL WEBSERVICE URL TO POST APPLICATION RESPONSE TO DEALERTRACK |
XWS_XAE_ROUTEONE_RESP_PWD |
ROUTE ONE APPLICATION RESPONSE BASIC AUTH PASSWORD |
XWS_XAE_ROUTEONE_RESP_URL |
ROUTE ONE APPLICATION RESPONSE URL |
XWS_XAE_ROUTEONE_RESP_USER |
ROUTE ONE APPLICATION RESPONSE BASIC AUTH USER |
XWS_XAE_ROUTEONE_WS_URL |
OFSLL WEBSERVICE URL TO POST APPLICATION RESPONSE TO ROUTE ONE |
XWS_XAE_EDOC_RESP_URL |
EDOCS APPLICATION RESPONSE BASIC AUTH PASSWORD |
XWS_XAE_EDOC_WS_URL |
EDOCS APPLICATION RESPONSE URL |
XWS_XAE_EDOC_RESP_USER |
EDOCS APPLICATION RESPONSE BASIC AUTH USER |
XWS_XAE_EDOC_RESP_PWD |
OFSLL WEBSERVICE URL TO POST APPLICATION RESPONSE TO EDOCS |
XWS_XPR_DLR_TRACK_RESP_PWD |
DEALER TRACK DEALER LOAD PASSWORD |
XWS_XPR_DLR_TRACK_RESP_URL |
DEALER TRACK DEALER LOAD RESPONSE URL |
XWS_XPR_DLR_TRACK_RESP_USER |
DEALER TRACK DEALER LOAD USER ID |
XWS_XPR_DLR_TRACK_WS_URL |
OFSLL WEBSERVICE URL TO POST DEALER DETAILS TO DEALER TRACK |
XWS_XPR_INCLUDE_TEMP |
INCLUDE TEMP PRODUCERS |
XWS_XPR_ROUTEONE_RESP_PWD |
ROUTE ONE DEALER LOAD PASSWORD |
XWS_XPR_ROUTEONE_RESP_URL |
ROUTE ONE DEALER LOAD RESPONSE URL |
XWS_XPR_ROUTEONE_RESP_USER |
ROUTE ONE DEALER LOAD USER ID |
XWS_XPR_ROUTEONE_WS_URL |
OFSLL WEBSERVICE URL TO POST DEALER DETAILS TO ROUTE ONE |
XWS_XAE_DLR_TRACK_LENDERID |
DEALERTRACK LENDER ID |
XWS_XAE_ROUTEONE_LENDERID |
ROUTEONE LENDER ID |
XWS_XAE_DLR_TRACK_LENDER_NAME |
DEALERTRACK LENDER NAME |
XWS_XAE_ROUTEONE_LENDER_NAME |
ROUTEONE LENDER NAME |
XWS_XAE_ECON_ROUTEEONE_RESP_URL |
Route One E-contract response URL |