5.1.27 SCCP Loop Sets

A SCCP Loop Sets define all the data related to SccpLoopSet entry.

Select the VSTP, and then Configuration, and then SCCP Loop Sets page. The page displays the elements on the SCCP Loop Sets View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-27 SCCP Loop Sets Elements

Element	Description	Data Input Notes
Action	Action to be taken when Sccp Loop is detected.	Format: Drop down menu Range = notifyOnly, discardOnly
Domain	Defines the type of incoming message network domain. This is a mandatory field.	Format: Drop down menu Range = Ansi Itun Itui Itun24 Itui_s Itun_s Itun16
Loop Set Name	Name for this Sccp loopset, which must be unique within the VSTP site. This is a mandatory field.	Valid names are strings between one and 10 characters, inclusive. Valid characters are alphanumeric and underscore. The name must contain at least one alpha and must not start with a digit.
Point Code 1	List of signaling Pointcodes.
Point Code 2	List of signaling Pointcodes.
Point Code 3	List of signaling Pointcodes.
Point Code 4	List of signaling Pointcodes.
Point Code 5	List of signaling Pointcodes.
Point Code 6	List of signaling Pointcodes.
Point Code 7	List of signaling Pointcodes.
Point Code 8	List of signaling Pointcodes.
Point Code 9	List of signaling Pointcodes.
Point Code 10	List of signaling Pointcodes.
Point Code 11	List of signaling Pointcodes.
Point Code 12	List of signaling Pointcodes.

You can perform add, edit, or delete tasks on VSTP>Configuration>SCCP Loop Sets page.

Adding a SCCP Loop set

Perform the following steps to configure a new SCCP Loop set:

1. Click Insert.

   Note:

   he SCCP Loop set name must be unique as it refers to the Service name at the SOAM.
2. Enter the applicable values.
3. Click OK, Apply, or Cancel

Editing a SCCP Loop set

Use this procedure to change the field values for a selected SCCP Loop set. (The SCCP Loop set Name field cannot be changed.):

1. Select the SCCP Loop set row to be edited.
2. Click Edit
3. Enter the updated values.
4. Click OK, Apply, or Cancel

Deleting a SCCP Loop set

Use the following procedure to delete a SCCP Loop set.

Note:

if the SCCP Loop set is associated with a Service , the SCCP Loop set cannot be deleted.

1. Select the SCCP Loop set to be deleted.
2. Click Delete.
3. Click OK or Cancel.