Oracle^® ZFS Storage ZS7-2 Getting Started Guide

Oracle^® ZFS Storage ZS7-2 Getting Started Guide

Contents

1 Oracle ZFS Storage ZS7-2 controller 2 Two power cords 3 Slide rail kit 4 Cable management arm 5 One 6-meter Ethernet cable (black) 6 Three 2.5-meter Ethernet cables (black, yellow, green) 7 Up to eight (mid-range model) or up to sixteen (high-end model) 3-meter or 6-meter active optical SAS cables (blue). Length and quantity per customer request, and sold separately.

Front Panel Components

1 RFID tag 2 System status LED: Locator (white) 3 System status LED: Service Action Required (amber) 4 System status LED: Power/OK (green) 5 Power button 6 Fan service action required (amber) 7 Power Supply (PS) service action required (amber) 8 Over-temperature warning (amber) 9 Service Processor (SP) OK (green) 10 Do Not Service indicator 11 System disk 0 12 System disk 1 13 Filler panel 14 Filler panel 15 Filler panel 16 Filler panel 17 Filler panel 18 Filler panel 19 Filler panel 20 Filler panel 21 Filler panel 22 Filler panel

Back Panel Components

1 Power Supply Unit (PSU) 1 2 PSU 1 status indicators (top to bottom): Attention (amber) Power/OK (green) 3 PSU 0 4 PSU 0 status indicators (top to bottom): Attention (amber) Power/OK (green) 5 Fifth PCIe option (slot 1) 6 External SAS-3 HBA (slot2) 7 Slot 3: High-end model: External SAS-3 HBA Mid-range model: Filler panel 8 First PCIe option (slot 4) 9 Third PCIe option (slot 5) 10 Cluster interface card (slot 6) 11 Serial management (SER MGT) RJ-45 serial port 12 Service Processor (SP) NET MGT port 13 Network (NET) 100/1000BASE-T RJ-45 Gigabit Ethernet (GbE) port: NET 0 14 USB 3.0 port 15 System status LEDs: Locate (white) - left Attention (amber) - right, top Power/OK (green) - right, bottom 16 Fourth PCIe option (slot 7) 17 Second PCIe option (slot 8) 18 Slot 9: High-end model: External SAS-3 HBA Mid-range model: Filler panel 19 External SAS-3 HBA (slot 10) 20 Internal SAS-3 HBA (slot 11)

Install the Hardware

For detailed information, see the Oracle ZFS Storage Appliance Installation Guide available from https://docs.oracle.com/en/storage.

Connect System Cables

For detailed information, see the Oracle ZFS Storage Appliance Installation Guide available from https://docs.oracle.com/en/storage. If you have clustered controllers, connect the cables to both controllers. Do not connect power cables to the controllers or disk shelves until instructed to do so in "Power On and Configure the System." The following illustration shows an Oracle ZFS Storage ZS7-2 high-end model.

Connect Clustered Controllers

If you have clustered controllers, connect the two controllers together. For detailed information, see the Oracle ZFS Storage Appliance Cabling Guide available from https://docs.oracle.com/en/storage.

Connect Disk Shelves

The following illustration shows clustered controllers connected to an Oracle Storage Drive Enclosure DE3-24P (left panel), and connected to four DE3-24x disk shelves (right panel). For additional configuration options, see Oracle ZFS Storage Appliance Cabling Guide available from https://docs.oracle.com/en/storage. Do not connect power cables to disk shelves or controllers until instructed to do so in "Power On and Configure the System."

The following procedure connects an AOC cable to the controller and to an Oracle Storage Drive Enclosure DE3-24P disk shelf. For additional information, see Oracle ZFS Storage Appliance Cabling Guide available from https://docs.oracle.com/en/storage.

1. Facing the controller HBA, position the cable's release tab to the right (left panel) for the controller end, and to the top for the disk shelf end (#1 in right panel).

2. Insert the cable connectors into the appropriate ports, aligning the cable connector latches (#2 in right panel) with the port latch receiver holes (#3 in right panel). Ensure the latches engage with the receiver holes.

Power On and Configure the System

Required information: Network host name and port of your serial connection, or network management port DHCP-assigned address. Connect disk shelf power cables, power on disk shelves, connect controller power cables, power on controllers, and configure the system as described in the Oracle ZFS Storage Appliance Installation Guide available from https://docs.oracle.com/en/storage.

Perform Initial Configuration

For detailed information, see the Oracle ZFS Storage Appliance Installation Guide available from https://docs.oracle.com/en/storage, including properly configuring management interfaces and updating controller software.