IJXML メッセージ 0-99

8	INFO: val errors, val1 warnings
	説明	There were multiple errors and multiple warnings during the execution of buildjavaserver. The errors and the warnings were reported in a previous message. No output files were generated. The val value is replaced with the number of errors. The val1 value is replaced with the number of warnings.
	アクション	Fix the errors and execute buildjavaserver again.
9	ERROR: Missing argument to -s option
	説明	The -s option to buildjavaserver must be followed by a search path similar to a Java class path. This argument was not specified on the command line.
	アクション	Add the search path argument to the command line and run buildjavaserver again.
10	ERROR: Invalid option ''val''
	説明	An invalid option was passed to buildjavaserver.
	アクション	See the Java Programming Reference for the list of valid options to buildjavaserver, fix the command line, and run the command again.
11	ERROR: Missing input file argument
	説明	The last command line argument to buildjavaserver must be the name of an XML input file. That name is missing.
	アクション	Add the input file name argument to the command line and run buildjavaserver again.
12	ERROR: Cannot open val
	説明	The XML input file val could not be opened for reading. No output file will be generated.
	アクション	Make sure the input file val exists and is readable.
13	ERROR: Unexpected EOF
	説明	The XML parser reached the end of file unexpectedly. No output file will be generated.
	アクション	Fix the XML syntax of the input file.
14	ERROR: Unexpected ''val''
	説明	The XML parser found an unexpected token in the source. The val value is replaced by the token. Depending on the situation, parsing will continue after reporting the error or will stop immediately. In any case, no output file will be generated.
	アクション	Fix the XML syntax of the input file.
15	ERROR: I/O Error
	説明	An I/O error occurred reading the XML input file. This is a fatal error. No more processing is attempted. No output file will be generated.
	アクション	Check the XML input file for read access, bad blocks, locks, and so forth.
16	WARN: Illegal ''--'' in comment
	説明	It is illegal to have a double dash (--) in an XML comment, except to introduce the end of comment -->.
	アクション	This is a warning. However, the comment should be fixed, because other XML parsers could reject the input.
17	ERROR: End of file in comment
	説明	The end of file was reached in a comment.
	アクション	Look for any nonterminated comments in the input file.
18	ERROR: Invalid character sequence <!-val
	説明	The character val is not valid after <!-. The XML parser for buildjavaserver only supports <!-- to start comments.
	アクション	Fix the XML syntax of the input file.
19	ERROR: Unexpected character ''val'' after ''<!val1''
	説明	A non-white-space character is present after <!val1. The val1 value can be either ENTITY or DOCTYPE.
	アクション	Fix the XML syntax of the input file.
20	ERROR: Unsupported keyword ''val''
	説明	A <! is followed by a keyword that was neither ENTITY nor DOCTYPE. The val value is replaced with the offending keyword.
	アクション	Fix the XML syntax of the input file.
21	ERROR: Unsupported processing instruction ''val''
	説明	A <? can be followed only by xml. The val value is replaced with the three characters at the beginning of the offending word.
	アクション	Fix the XML syntax of the input file.
22	ERROR: Unexpected ''val'' after ''</''
	説明	An invalid character (such as a white-space character) follows </.
	アクション	Fix the XML syntax of the input file.
23	ERROR: Unexpected ''val'' after ''</val1''
	説明	An element closing tag must end with >. An invalid character (such as a white-space character) follows </val1. The val1 value is replaced with the keyword in the closing tag.
	アクション	Fix the XML syntax of the input file.
24	ERROR: Unexpected ''</val>'' closing tag
	説明	The val value is an unknown element tag.
	アクション	Fix the XML syntax of the input file.
25	ERROR: Unexpected ''val'' after ''<''
	説明	An invalid character (such as a white-space character) follows a <. The val value is replaced with the offending character.
	アクション	Fix the XML syntax of the input file.
26	ERROR: Unexpected ''<val>'' element
	説明	The val value is an unknown element tag.
	アクション	Fix the XML syntax of the input file.
27	ERROR: Unexpected ''val'' after ''?''
	説明	The val value is an invalid character after the question mark character (?). Only > can follow a ?.
	アクション	Fix the XML syntax of the input file.
28	ERROR: Unexpected ''val'' after ''/''
	説明	The val value is an invalid character after /. Only > can follow a /, except in an element closing tag.
	アクション	Fix the XML syntax of the input file.
29	ERROR: Missing XML declaration
	説明	Every XML document must begin with an XML declaration <?xml version="1.0"?>.
	アクション	Fix the XML syntax of the input file.
30	ERROR: Unexpected ''val'' in XML declaration
	説明	Only the version declaration is valid in the XML declaration. The val value is replaced with the offending declaration keyword.
	アクション	Fix the XML syntax of the input file.
31	ERROR: Missing ''='' after ''version'' in XML declaration
	説明	The version declaration must be followed by the = sign in the XML declaration.
	アクション	Fix the XML syntax of the input file.
32	ERROR: Only supported version of XML is 1.0
	説明	The only version recognized by the XML parser is 1.0.
	アクション	Fix the XML syntax of the input file.
33	ERROR: Missing end of XML declaration
	説明	The ?> is missing at the end of the XML declaration.
	アクション	Fix the XML syntax of the input file.
34	ERROR: Invalid value ''val'' for ''<val1>''
	説明	Value val is invalid for attribute or entity val1.
	アクション	Fix the XML syntax of the input file.
35	ERROR: Cannot load class ''val''
	説明	buildjavaserver failed to load class val.
	アクション	Make sure class val can be reached from the CLASSPATH or from the search path specified with the -s option to buildjavaserver.
36	ERROR: Unexpected ENTITY definition ''val''
	説明	The only two entities that can be redefined in the internal subset are transaction_policy and activation_policy. The val value is replaced with the unexpected ENTITY name.
	アクション	Fix the XML syntax of the input file.
37	ERROR: Unexpected ''val'' in internal subset
	説明	Only entities can be redefined in the internal subset. The val value is the start of a nonentity definition.
	アクション	Fix the XML syntax of the input file.
38	WARN: Missing DOCTYPE. Assuming M3-SERVER
	説明	No <!DOCTYPE declaration was specified in the XML file. buildjavaserver assumes that the document is of type M3-SERVER.
	アクション	None.
39	ERROR: Only supported document type is M3-SERVER
	説明	When specifying a DOCTYPE declaration in the XML file, the document type must be M3-SERVER.
	アクション	Fix the XML syntax of the input file.
40	ERROR: Expected SYSTEM after M3-SERVER
	説明	The M3-SERVER DTD has no URL. The DOCTYPE declaration must always use the SYSTEM identifier.
	アクション	Fix the XML syntax of the input file.
41	ERROR: Expected "m3.dtd" after SYSTEM
	説明	The string after SYSTEM in the DOCTYPE must be "m3.dtd".
	アクション	Fix the XML syntax of the input file.
42	ERROR: Unexpected ''val'' at end of DOCTYPE
	説明	The DOCTYPE declaration must end with >. The val value is replaced with the offending character.
	アクション	Fix the XML syntax of the input file.
43	ERROR: Expected ''<M3-SERVER>'' tag instead of ''val''
	説明	The document tag must be M3-SERVER. The val value is replaced with the name of the offending tag.
	アクション	Fix the XML syntax of the input file.
44	ERROR: Cannot find directory for ''val''
	説明	The absolute pathname for file. The val value cannot be retrieved.
	アクション	Make sure there are no access restrictions for the current user on the directory.
45	ERROR: Invalid attribute ''val'' in <val1>
	説明	The attribute name val is invalid for element val1.
	アクション	Fix the XML syntax of the input file.
46	ERROR: Unexpected ''val'' in <val1>
	説明	The token val is unexpected in element val1.
	アクション	Fix the XML syntax of the input file.
47	ERROR: The <ARCHIVE> tag must appear last in <M3-SERVER>
	説明	If the <ARCHIVE> element is specified in an XML input file, the element must be the last one inside an <M3-SERVER> element.
	アクション	Move the archive element to the end of the <M3-SERVER> element.
48	ERROR: Only one <ARCHIVE> tag allowed in <M3-SERVER>
	説明	Only one archive element is allowed inside an <M3-SERVER> element.
	アクション	Remove the duplicate archive element.
49	ERROR: Unexpected ''val'' in <M3-SERVER>
	説明	The element val is invalid in an <M3-SERVER> element.
	アクション	Fix the XML syntax of the input file.
50	WARN: No ''server-implementation'' in <M3-SERVER>. Defaulting to ''com.beasys.Tobj.Server''
	説明	If no server-implementation attribute is present in the <M3-SERVER> element, buildjavaserver defaults to com.beasys.Tobj.Server.
	アクション	None.
51	WARN: No ''server-descriptor-name'' in <M3-SERVER>. Defaulting to ''Server.ser''
	説明	If no server-descriptor-name attribute is present in the <M3-SERVER> element, buildjavaserver defaults to Server.ser.
	アクション	None.
52	ERROR: Cannot create file ''val''
	説明	The file val cannot be created. The file is either the server descriptor or a temporary file created when preparing the archive.
	アクション	Make sure there is no permission problem that may inhibit the creation of the file (such as an existing read-only file already in the same directory), and that the file system is not out of resources.
53	ERROR: Multiple occurrences of ''val'' in <val1>
	説明	There is more than one occurrence of attribute val in element val1.
	アクション	Remove extra occurrence(s).
55	ERROR: Missing attribute ''val'' in <val1>
	説明	There is no occurrence of the required attribute val in element val1.
	アクション	Add the missing attribute.
56	ERROR: Redefinition of ''val''
	説明	The val value is being redefined as a different object. For instance, it was initially defined as a module, and it is now defined as in implementation, and vice versa.
	アクション	Remove the extraneous definition.
57	WARN: <MODULE> ''val'' is empty
	説明	Module val does not contain any implementations and could be removed from the XML file.
	アクション	None.
58	ERROR: Unexpected ''val'' at end of <val1>
	説明	This message is generated if a module or an archive definition does not end with the matching closing tag (for example, </ARCHIVE> for an archive). This message is also generated if an implementation element definition that does not end with /> (that is, as an empty tag) is not followed immediately with an implementation closing tag </IMPLEMENTATION>.
	アクション	Fix the XML syntax of the input file.
60	WARN: File ''val'' already in archive ''val1'' as ''val2''. Ignoring duplicate
	説明	The file val is already in the archive val1, coming from val2, where val2 is either a full path name or a name inside a ZIP or JAR archive. The redefinition is ignored.
	アクション	None.
61	ERROR: Cannot find class file for ''val''
	説明	The class file for class val cannot be found on the search path.
	アクション	Make sure the search path is correct. Check that the class name is correct.
62	ERROR: Directory ''val'' not found
	説明	The directory val cannot be found. The val value is created by the concatenation of a prefix and a name in a <DIRECTORY> element.
	アクション	Make sure there are no access restrictions for the current user on the directory and that the name is spelled correctly.
63	ERROR: ''val'' is not a directory
	説明	The val value is not a directory. The val value is created by the concatenation of a prefix and a name in a <DIRECTORY> element.
	アクション	Make sure the name is spelled correctly.
64	ERROR: File ''val'' not found
	説明	The file val cannot be found. The val value is created by the concatenation of a prefix and a name in a <FILE> element.
	アクション	Make sure there are no access restrictions for the current user on the file and that the file name is spelled correctly.
65	ERROR: ''val'' is not a regular file
	説明	The val value is not a regular file. The val value is created by the concatenation of a prefix and a name in a <FILE> element.
	アクション	Make sure the file name is spelled correctly.
66	ERROR: Package ''val'' not found
	説明	No class files could be found in Java package val. The val value comes from a <PACKAGE> or a <PACKAGE-RECURSIVE> element.
	アクション	Make sure the class files for the packages can be found on the search path and that the package name is spelled correctly.
67	ERROR: No classes in anonymous package
	説明	No class files could be found for the anonymous package (that is, classes whose source file does not include a package statement). This message is generated when processing the <PACKAGE-ANONYMOUS> element.
	アクション	Make sure the class files can be found on the search path.
68	ERROR: Directory ''val'' exists already
	説明	The directory val should be used to prepare the creation of the archive, but the name already exists in the file system.
	アクション	The existing directory must be removed or renamed. Alternatively, buildjavaserver can be executed from another directory that does not contain an entry by that name.
69	ERROR: Cannot create directory ''val''
	説明	The val value is the name of a directory that is created when preparing the creation of the archive. The directory cannot be created.
	アクション	Make sure there are no access restrictions on the directory for the current user and that the file system is not out of resources.
70	ERROR: ''val'' exists and is not a directory
	説明	The directory val is created when preparing the creation of the archive. Another file by that name has already been created, and the directory cannot be created.
	アクション	Check the directory and the file name.
71	ERROR: Cannot copy ''val'' to ''val1''
	説明	The file val cannot be copied to val1 when preparing the creation of the archive. The val value is either an absolute file name or an entry in a ZIP or JAR archive.
	アクション	Make sure there are no access restrictions on valand that the file system is not out of resources.
72	ERROR: Cannot change to directory ''val''
	説明	buildjavaserver cannot set the current directory to val.
	アクション	Check that there are no permission problems on the directory. Also make sure that the umask is not too restrictive when creating directories.
73	ERROR: Cannot create archive ''val''
	説明	The execution of the jar command failed.The messages issued by the jar command provide more information.
	アクション	Depends on the information given by the jar command. For information on the jar command, refer to the online documentation included with JDK 1.2 and the Java Programming Reference.
74	WARN: Cannot remove ''val''
	説明	The temporary file val cannot be removed.
	アクション	Remove the leftover files after the buildjavaserver command completes.
75	ERROR: Cannot write ''val''
	説明	There is an I/O error when the system attempts to write to temporary file val.
	アクション	Check that there are sufficient resources in the file system.
76	ERROR: Cannot open ''val''
	説明	The file val cannot be opened for reading.
	アクション	Make sure the current user has read permission on the file.
77	ERROR: Empty value for attribute ''val''
	説明	The value for attribute val is an empty string.
	アクション	Add a valid value for the attribute.
78	ERROR: Invalid value ''val'' for attribute ''val1''
	説明	The value val is not valid for attribute val1. Typically, the attribute should contain a Java class or a package name, and the name is not a valid dot-separated Java identifier.
	アクション	Make sure the value is valid for the attribute.
79	ERROR: Class ''val'' in ''server-implementation'' does not extend com.beasys.Tobj.Server
	説明	The class whose name is specified in the server-implementation attribute of the <M3-SERVER> element must either derive from com.beasys.Tobj.Server or be the com.beasys.Tobj.Server class itself.
	アクション	Check that the class name for the server-implementation attribute is correct. Make sure that the specified class extends com.beasys.Tobj.Server.
80	ERROR: Class ''val'' in ''name'' is not a servant implementation
	説明	The class val found in an implementation element does not derive from a skeleton generated by the m3idltojava compiler.
	アクション	Make sure the base class for val is a valid skeleton.
81	ERROR: ''implements'' value ''val'' does not match servant id ''val1''
	説明	The implements attribute value val does not match the interface repository ID found in the implementation class being processed. The interface repository ID is actually part of the skeleton class used as the base class for the implementation class.
	アクション	Make sure the interface repository ID is correct. Alternatively, the implements attribute can be omitted completely, in which case the value found in the implementation class will be used.