bea Home | 製品 | dev2dev | support | askBEA |
![]() |
![]() |
|
![]() |
e-docs > Tuxedo > メッセージ > WEBGUI カタログ リスト > WEBGUI メッセージ 2900-2999 |
|
WEBGUI メッセージ 2900-2999
2900 |
ERROR: actSet: call failed..., tperrno=tperrno: error string | |
|
説明 |
The GUI made a |
アクション |
Contact BEA Customer Support and provide them with a description of action being performed along with relevant ULOGs. | |
関連項目 |
| |
2901 |
ERROR: actGetState: GET call failed... | |
|
説明 |
The GUI was unable to access the Tuxedo System/T MIB. Look at surrounding entries in the ULOG to determine the cause of the failure. This is a critical error. The ongoing Activation, Deactivation or Migration action will not succeed. |
アクション |
Contact your BEA Technical Support and provide them with a description of action being performed along with relevant ULOGs. | |
関連項目 |
| |
2902 |
WARN: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a |
アクション |
No action is needed. | |
関連項目 |
tpterm(3c) | |
2903 |
WARN: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a |
アクション |
No action is needed. | |
関連項目 |
| |
2904 |
ERROR: LmidToPmid: GET call failed... | |
|
説明 |
The GUI tried to access the Tuxedo System/T MIB to retrieve attributes of a Machine. This call has failed. Look at surrounding entries in the ULOG to determine the cause of the failure. This is a non-critical error and does not affect the GUI's functionality or performance. However, because of this error, the Progress Window of the ongoing Activation, Deactivation or Migration action, while displaying status messages, might display the LMIDs rather than PMIDs for some sites in the application. |
アクション |
No action is needed. | |
2905 |
ERROR: CONFTOOL: Could not get MIB attributes | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2906 |
ERROR: CONFTOOL: Could not set MIB attributes | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2907 |
WARN: CONFTOOL: COMMAND not recognized: (command) | |
|
説明 |
BEA Tuxedo WEB GUI internal warning. |
アクション |
Contact BEA Customer Support. | |
2908 |
ERROR: CONFTOOL: cfSetupGwMsg() failed. | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2909 |
ERROR: Memory allocation failure | |
|
説明 |
An attempt to dynamically allocate memory has failed. |
アクション |
Make sure that the operating system parameters are set correctly for the amount of memory that can be used by a process. Reduce the amount of memory usage on the machine or increase the amount of physical memory in the system. | |
2910 |
ERROR: CONFTOOL: cfSetupGwMsg() failed. | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2912 |
ERROR: CONFTOOL: Bad class for NEW object | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2913 |
ERROR: Could not find occurrence number of attribute attributename | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2914 |
WARN: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a |
アクション |
No action is needed. | |
関連項目 |
| |
2915 |
ERROR: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a tpterm(3c) from the application. Look at surrounding entries in the ULOG to determine the cause of the tpterm(3c) failure. This is a critical, internal error in the GUI and because of this, the ongoing Domain-level deactivation will not succeed. |
アクション |
Contact your BEA Technical Support and provide them with a description of action being performed and relevant ULOGs. | |
関連項目 |
tpterm(3c) | |
2916 |
WARN: unknown protocol received | |
|
説明 |
The GUI's server side received an unknown message from the JAVA front-end of the GUI. This is an internal error in the GUI and may or may not affect the GUI's functionality or performance. |
アクション |
Contact BEA Customer Support and provide a description of the action being performed when this error was seen. | |
2917 |
ERROR: tpsetunsol failed: tperrno | |
|
説明 |
The GUI was unable to setup a handler to receive unsolicited notifications. Look at surrounding entries in the ULOG to determine the reason for the failure. This error will not affect the GUI's performance or functionality in any way. However, because of this error, the GUI will not display notification messages that are sent by Tuxedo when server processes are booted/shutdown/restarted etc. |
アクション |
Look in the ULOG to determine why the unsolicited notification handler could not be set up. | |
関連項目 |
| |
2918 |
ERROR: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a tpterm(3c) from the application. Look at surrounding entries in the ULOG to determine the cause of the tpterm(3c) failure. This is a critical, internal error in the GUI and because of this, the ongoing Domain-level deactivation will not succeed. |
アクション |
Contact BEA Customer Support and provide them with a description of action being performed and relevant ULOGs. | |
関連項目 |
tpterm(3c) | |
2919 |
ERROR: isEvtBrkrActive: GET call failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2920 |
ERROR: TUXDIR not set in initialization file | |
|
説明 |
The |
アクション |
Specify the | |
2921 |
ERROR: Could not open ini file | |
|
説明 |
The BEA Tuxedo WEB GUI initialization file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2922 |
WARN: guimib_tpterm failed,tperrno = error | |
|
説明 |
The GUI was unable to do a |
アクション |
No action is needed. | |
関連項目 |
| |
2923 |
WARN: unknown protocol received | |
|
説明 |
The GUI's server side received an unknown message from the JAVA front-end of the GUI. This is an internal error in the |
アクション |
Contact BEA Customer Support and provide a description of the action being performed when this error was seen. | |
2924 |
ERROR: migrate: Get failed..cannot continue.. | |
|
説明 |
The GUI was unable to access the Tuxedo System/T MIB. Look at the surrounding entries in the ULOG and messages in the Progress Window to determine the cause of the failure. This is a critical, internal error in the GUI and because of this, the ongoing Migration action will fail. |
アクション |
Contact BEA Customer Support and provide them with a description of the action being performed and relevant ULOGs. | |
関連項目 |
| |
2925 |
ERROR: migrate: Set call failed..cannot continue.. | |
|
説明 |
The GUI was unable to access the Tuxedo MIB. Look at the surrounding entries in the ULOG and messages in the Progress Window to determine the cause of the failure. This is a critical, internal error in the GUI and because of this, the ongoing Migration action will fail. |
アクション |
Contact BEA Customer Support and provide them with a description of the action being performed and relevant ULOGs. | |
関連項目 |
| |
2926 |
ERROR: Cannot open ini file | |
|
説明 |
The BEA Tuxedo WEB GUI initialization file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2927 |
ERROR: Cannot open ini file | |
|
説明 |
The BEA Tuxedo WEB GUI initialization file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2928 |
ERROR: Cannot open tmp file: filename | |
|
説明 |
The file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2929 |
ERROR: Cannot replace .ini file with tmp file | |
|
説明 |
The BEA Tuxedo WEB GUI initialization file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2930 |
ERROR: getAppqspaces: MIB request on T_APPQSPACE failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2931 |
ERROR: getDevices: MIB request on T_APPQSPACE failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2932 |
ERROR: getAppqspaces: MIB request failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2933 |
ERROR: Cannot open ini file | |
|
説明 |
The BEA Tuxedo WEB GUI initialization file could not be opened. |
アクション |
Check the permission of the file. Make sure you have read and write privileges. | |
2934 |
ERROR: MIB request failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2935 |
ERROR: sendGetChildrenMssg: TA_ERROR was not found in the MIB buffer | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2936 |
ERROR: sendGetChildrenMssg: MIB request failed with TA_ERROR=number | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2937 |
ERROR: GETWLS: MIB request failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2938 |
ERROR: GETWLS: MIB request failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2939 |
ERROR: GETWLS: MIB request failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2940 |
ERROR: checkLmidStr: GET call failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2941 |
ERROR: checkLmidStr: TA_LMID not returned in GET call | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2944 |
ERROR: could not get domain info | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2945 |
ERROR: tpinit failed | |
|
説明 |
BEA Tuxedo WEB GUI internal error. |
アクション |
Contact BEA Customer Support. | |
2946 |
ERROR: Memory reallocation failure | |
|
説明 |
An attempt to dynamically allocate memory has failed. |
アクション |
Make sure that the operating system parameters are set correctly for the amount of memory that can be used by a process. Reduce the amount of memory usage on the machine or increase the amount of physical memory in the system. | |
2947 |
ERROR: Memory allocation failure | |
|
説明 |
An attempt to dynamically allocate memory has failed. |
アクション |
Make sure that the operating system parameters are set correctly for the amount of memory that can be used by a process. Reduce the amount of memory usage on the machine or increase the amount of physical memory in the system. | |
2948 |
ERROR: Memory allocation failure | |
|
説明 |
An attempt to dynamically allocate memory has failed. |
アクション |
Make sure that the operating system parameters are set correctly for the amount of memory that can be used by a process. Reduce the amount of memory usage on the machine or increase the amount of physical memory in the system. | |
2949 |
ERROR: Memory allocation failure | |
|
説明 |
An attempt to dynamically allocate memory has failed. |
アクション |
Make sure that the operating system parameters are set correctly for the amount of memory that can be used by a process. Reduce the amount of memory usage on the machine or increase the amount of physical memory in the system. | |
2950 |
ERROR: Memory allocation failure | |
|
説明 |
The |
アクション |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2951 |
ERROR: Memory allocation failure | |
|
説明 |
The |
アクション |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2952 |
ERROR: Memory allocation failure | |
|
説明 |
The |
アクション |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2953 |
ERROR: Memory allocation failure | |
|
説明 |
The |
アクション |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
![]() |
![]() |
![]() |
![]() |
||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |