1. Release Notice
  2. Resolved and Known Bugs

7 Resolved and Known Bugs

This chapter lists the resolved and known bugs for DSR release 8.5.x.

These lists are distributed to customers with a new software release at the time of General Availability (GA) and are updated for each maintenance release.

Severity Definitions

The problem report sections in this document refer to bug severity levels. Definitions of these levels can be found in the publication, TL 9000 Quality Management System Measurement Handbook.

Problem Report

A report from a customer or on behalf of the customer concerning a product or process defect requesting an investigation of the issue and a resolution to remove the cause. The report may be issued via any medium.

Problem reports are systemic deficiencies with Hardware, software, documentation, delivery, billing, invoicing, servicing, or any other process involved with the acquisition, operation, or performance of a product. An incident reported simply to request help to bring back the service or functionality to normal without the intent to investigate and provide a resolution to the cause of the incident is not a problem report.

  1. Critical: Conditions that severely affect the primary functionality of the product and because of the business impact to the customer requires non-stop immediate corrective action regardless of time of day, or day of the week as viewed by a customer on discussion with the organization such as:
    • Product inoperability (total or partial outage),
    • A reduction in the capacity capability, that is, traffic/data handling capability, such that expected loads cannot be handled,
    • Any loss of emergency capability (for example, emergency 911 calls), or
    • Safety hazard or risk of security breach.
  2. Major: Product is usable, but a condition exists that seriously degrades the product operation, maintenance, or administration, etc., and requires attention during pre-defined standard hours to resolve the situation. The urgency is less than in critical situations because of a less immediate or impending effect on product performance, customers, and the customer's operation and revenue, such as:
    • Reduction in product's capacity (but still able to handle the expected load),
    • Any loss of administrative or maintenance visibility of the product and/or diagnostic capability,
    • Repeated degradation of an essential component or function, or
    • Degradation of the product's ability to provide any required notification of malfunction.
  3. Minor: Other problems of a lesser severity than critical or major such as conditions that have little or no impairment on the function of the system.

The numbered severity levels in the tables below correspond to these definitions of 1–Critical, 2–Major, or 3–Minor.

Resolved Bug List

Release 8.5.0.2.0

DSR

Table 7-1 DSR Release 8.5.0.2.0 Resolved Bugs

Bug Number Severity Found in Release Title
32705552 3 8.4.0.0.0 No XML document error while exporting alarm history at SOAM and NOAM
32746021 3 8.4.0.0.0 Edit of Peer Node failed when 32 Peers are configured
33006967 3 8.5.0.0.0 Fix for Rx Sh UDR comagent alarm for release 8.5.0.0.0.0.2.0
33019146 3 8.5.0.0.0 Diameter: Peer Node Groups Export fails
33140635 4 8.5.0.0.0 IPFE reboot is observed, due to the ETH OPS Line getting added during the upgrade
31678337 3 8.1.0.0.0 GUI for SNMP Trap Ack/Unack partial command not working
25529974 3 8.0.0.0.0 DSR MMI Issues in AppWorks MON URIs
32547500 4 8.4.0.0.0 "count" is different than the total records in CSV exported file

vSTP

Table 7-2 vSTP Release 8.5.0.2.0 Resolved Bugs

Bug Number Severity Found in Release Title
33051190 3 8.5.0.0.0 Incorrect Transaction Portion on VSTP generated TCAP Error
33051180 3 8.5.0.0.0 TOBR not working for segmented xudt
32741924 2 8.5.0.0.0 MMI is NOT allowing to add IPv6 Connection
33030133 3 8.5.0.0.0 Linkset BIE not working correctly and there are incorrect SSN prohibited alarms
33184829 2 8.5.0.0.0 Issues in Local Signaling Point, Remote Signaling Point and Network Appearances due to group code
33207557 3 8.5.0.0.0 vSTP adding extra bytes to outgoing message causing message length to exceed 272 bytes
33236804 3 8.5.0.0.0 ServingNodeIndication not going in ATI request in PS domain(SFAPP Feature)
33198402 3 8.5.0.0.0 ITUIS and ITUNS pointcode support for Sfapp

VNFM

Table 7-3 VNFM Release 5.2.0.0.0 Resolved Bugs

Bug Number Severity Found in Release Title
33233157 2 5.0.0.0.0 Update apache tomcat to 9.0.50
33168721 3 5.0.0.0.0 Automate TSA Port Deletion on OpenStack while Termination
33168740 3 5.0.0.0.0 Rsync fix for not working on secondary vnfm
33164190 3 5.0.0.0.0 Cloud-init Fix For DR-NOAM issue
33203994 3 5.0.0.0.0 NOAM 01 cloud-init failure with state OOS
33149013 3 5.0.0.0.0 Automate Networking -> Services for Segregation of OAM and Replication Traffic.
32446561 3 5.0.0.0.0 Apache Tomcat 9.x < 9.0.40 Information Disclosure
32446781 3 5.0.0.0.0 SSH Server CBC Mode Ciphers Enabled
32446690 3 5.0.0.0.0 Apache Tomcat 5.0.0.0.0.x < 5.0.0.0.0.58 / 9.0.x < 9.0.38 HTTP/2 Request Mix-Up
32918962 3 5.0.0.0.0 Deploy APIGW VNF with Fixed IP address support
31768098 3 5.0.0.0.0 VNFM to support Scale out feature for APIGW VNF

SCEF

Table 7-4 SCEF Release 8.5.0.2.0 Resolved Bugs

Bug Number Severity Found in Release Title
33062871 3 8.5.0.0.0 SCEF: UE_REACHABILITY reporting needs correction
31363175 3 8.5.0.0.0 SCEF: AVP Number-Of-UE-Per-Location-Configuration is absent in CIR (ME NUMBER_OF_UES_IN_AN_AREA)
32338889 3 8.5.0.0.0 SCEF does not report edrxCycleLength and suggestedNumberOfD on T8
32976061 3 8.5.0.0.0 SCEF: ME Group subscription and reporting
32809663 3 8.5.0.0.0 SCEF: Support for External Group identifier for NIDD

Release 8.5.0.1.0

DSR

Table 7-5 DSR Release 8.5.0.1.0 Resolved Bugs

Bug Number Severity Found In Release Title
32673235 3 8.5.0.0.0 Database backup issue fix for ATS suite execution
32584437 4 8.5.0.0.0 VPLMNID_OLD State Data Field Name in UDR is mismatching
32246540 2 8.5.0.0.0 Patch delivery mechanism for BUG# 32202445 IPFE Target Sets MMI should expand the short form of IPv6 Addresses before entering in DB
32216053 3 8.5.0.0.0 Import/Export Support for all Radius MO's
32215542 4 8.5.0.0.0 DCA based Rx-ShUDR application Drop-2
32202469 3 8.5.0.0.0 ATS should use the long IPv6 format while inserting IPFE Target Sets through MMI
32202445 3 8.5.0.0.0 IPFE Target Sets MMI should expand the short form of IPv6 Addresses before entering in DB
32161952 4 8.5.0.0.0 MCPTT Rx Gateway feature Code bug(Develoment Feature)
32140015 4 8.5.0.0.0 MPN vDRA feature request - Radius, Rf interface
32134480 3 8.5.0.0.0 DSA Package issue for grok pattern (ELK sample deliverable for customer )
32130808 2 8.5.0.0.0 Observed error Family/Opcode :[Error Code 002] - Invalid Syntax while editing opcode gta translation with family=*
32101395 4 8.5.0.0.0 vSTP SFAPP (SS7 FW) - ATI_ACK Decoding Error
32092399 4 8.5.0.0.0 HEAL VNF REST Resource Support for VNFM
32077093 3 8.5.0.0.0 SOAM PostUpgrade HealthCheck returns No Checks run
32077037 3 8.5.0.0.0 Change in MTP3 Configs user documentation.
32071538 3 8.5.0.0.0 Modify VNF URL fix
32056882 3 8.5.0.0.0 Discover REST request fails on Secondary VNFM
32045289 4 8.5.0.0.0 Rx-ShUDR DCA Application - MCPTT Rx Gateway feature
32017329 4 8.5.0.0.0 Invalid time/date in Diagnostic Tool Report
32012205 3 8.5.0.0.0 RADIUS UDP Client Ports with enabled Radius Connection
31993819 3 8.5.0.0.0 Not able to modify the entry in NPP Service Table
31869913 3 8.5.0.0.0 R8.5.0.0.0_ST:Incorrect information in /vstp/remotesignalingpointstatus MO
31869206 4 8.5.0.0.0 Comagent MMI commands not supported for older MMI version 3.0
31862788 4 8.5.0.0.0 R8.5.0.0.0_ST: asNotification adding as default parameter for Mtp2 type linksets
31846900 3 8.5.0.0.0 DSA Support for Session Integrity Validation Check
31818625 3 8.5.0.0.0 Ingress MSG per second counter on connection is not clearing after the traffic stops
31774486 4 8.5.0.0.0 system not allowed to delete the places directly even place association was present
31646904 4 8.5.0.0.0 MP_Perf: Performance rate of 5K TIF & 8GTT not working
31185206 3 8.5.0.0.0 8.4.0.5: httpd linux process core file formed post upgrade
30817039 4 8.5.0.0.0 DSA: Timeout answers messages not processed by Stateless CM limitation
29451723 3 8.5.0.0.0 Observed success and Error confirmations together when applied filter in KPIs screen
29373957 4 8.5.0.0.0 MMI allows nsfi=aftdstn for si=1 and si=2 for SIO MTP screening rules, whereas not for SI>=3
29367616 3 8.5.0.0.0 Database backup is not working for SDS SO in Rel 8.4.0.0.0-84.11.3
29226921 4 8.5.0.0.0 [MMI] - /vstp/featureadminstates - RAML document should be updated for supported GET/PUT Operations
27301480 3 8.5.0.0.0 Configuration of TCAP GTT entries
25975473 4 8.5.0.0.0 M2PA link status gets displayed as UP though its down
3251756 3 8.5.0.0.0 Subsystem Prohibited event not found on VSTP
32281311 3 8.5.0.0.0 Secondary Route Restricted on vSTP
32791474 3 8.5.0.0.0 vSTP setting spare bit value 0x03 by default in SLTM/SLTA message for ITU-I domain which causes link failure
31989029 4 8.4.0.0.0 Active and Standby NOAMs/SOAMs are sending SNMP traps instead of Active only

vSTP

Table 7-6 vSTP Release 8.5.0.1.0 Resolved Bugs

Bug number Severity Found In Release Subject
32672060 2 8.5.0.0.0 elynx driver is not loaded on VSTP release 8.5.0.0.0.0.1.0_91.12.0
32648541 3 8.5.0.0.0 HomeSMSC: Phase2 Call flow is working correctly with SMRPDA tag=81 (LMSI) in MTFSM Opcode
32647813 4 8.5.0.0.0 Retrieve linkset MO entries from SCCP instead of M3RL
32643425 3 8.5.0.0.0 Unwanted EXP DATA seen on outgoing updateLocation message after SFAPP processing
32637384 3 8.5.0.0.0 DSR 8.5.0.0.0: dsr process crash observed on all DAMPs in fresh Install, NO-DAMP leader detected & DB Replication alarms observed on GUI
32616855 2 8.5.0.0.0 Observed service MP unavailable alarm on 8.5.0.0.0.0.1.0_91.10.0 after upgrade.
32616525 3 8.5.0.0.0 vSTP Incremental upgrade failing from from Rel. 91.9 to Rel. 91.10
32611187 3 8.5.0.0.0 HomeSMSC: Incomplete event in case of IMSI length in MTFSM message is not equal to 14/15
32598483 2 8.5.0.0.0 HomeSMSC: MTFSM validation not working correctly in case of segmented XUDT MTFSM msgs
32598288 3 8.5.0.0.0 vSTP use TPC instead of SPC for M2PA linksets
32589739 2 8.5.0.0.0 vSTP_SIG: Traffic is not getting transmitted from MP after enabling Accounting Measurement Feature
32585749 3 8.5.0.0.0 vSTP - Known issues in ELYNX feature
32581131 4 8.5.0.0.0 abterm seen in Route on SSN CGPA MOFSM packet on appliying default action
32579579 2 8.5.0.0.0 HomeSMSC: vstp process is getting restarted on SS7 MP IF MT-FSM positive case has run just after negative case
32573302 4 8.5.0.0.0 Feature Admin State GUI Screen is displaying ¿TBGTTLS¿ feature status as No/Yes
32573104 3 8.5.0.0.0 HomeSMSC:Event NOT raised for MSISDN entry Not Found case in reportSmDeliveryStatus message
32572618 3 8.5.0.0.0 HomeSMSC: Incorrect handling in case of SRIACK received instead of MTFSM ACK
32572301 3 8.5.0.0.0 HomeSMSC: [Phase3] Incorrect behavior observed If sending ReportSM-DeliveryStatus message with MSISDN tag other than 0x04
32566081 2 8.5.0.0.0 vstp-gui RPM is missing from DSR.pkglist file
32564910 3 8.5.0.0.0 Incremental Upgrade Failing if vstp RPM is changed manually on the server
32557666 2 8.5.0.0.0 8.5.0.0.0.0.1_ST:NPP not applied correctly on MOSMS & IDPR
32554005 3 8.5.0.0.0 Preventive TFP not being sent to active route.
32552172 3 8.5.0.0.0 HomeSMSC: Fallback measurement is NOT getting pegged If Sending SRI-SM message without CGPA and Default Action=Fallback
32548095 2 8.5.0.0.0 HomeSMSC: [Perf]: Few MO-FSM calls were getting discarded due to SRI-SM Timeout when successful calls were running with 500 TPS
32548037 4 8.5.0.0.0 SRI SM ACK/MT FSM ACK should be send to proxy if CdRI = route on SSN and GTT digits mataches proxy digits and other hope counter/class issues
32547398 3 8.5.0.0.0 HomeSMSC:ScmblImsiLen parameter needs to be removed from smsproxyoptions MO
32546800 3 8.5.0.0.0 vSTP - Known issues in ELYNX feature
32543707 4 8.5.0.0.0 Error Codes additions and Enchancements for Elynx Interface Mapping Feature
32537424 3 8.5.0.0.0 HomeSMSC: 'SmsProxy' parameter should be turned ON for HLR linkset also
32537182 3 8.5.0.0.0 HomeSMSC: Inconsistent VstpSMSProxyMTSMInvkTimeout and VstpSMSProxySRISMSucc Meas when MTFSM is not received
32530573 2 8.5.0.0.0 HomeSMSC: One Proxy MP (out of 4 proxy MPs) is NOT able to handle MO-FSM Traffic
32529943 3 8.5.0.0.0 Upgrade loader missing for TID NOT FOUND FOR ACK
32523476 3 8.5.0.0.0 HomeSMSC: Messages should fall through normal GTT processing If Service MPs are Unavailable
32510662 3 8.5.0.0.0 8.5.0.0.0.0.1_ST:guiReqMap.log increasing in size to 3.2G
32507526 2 8.5.0.0.0 HomeSMSC: Proxy MP changing the Hop counter of reassembled message to 0
32495734 3 8.5.0.0.0 HomeSMSC: Phase2:Incorrect behavior when sending MT-FSM with Class1 Message
32489847 3 8.5.0.0.0 HomeSMSC: Phase2: Incorrect behavior observed If SRI-SM-ACK message is sending without Dialogue Portion
32488778 2 8.5.0.0.0 Tcap_Dec_enh:Event(70457) is not getting raised when sending message with invalid length in the transaction portion.
32487182 3 8.5.0.0.0 HomeSMSC: DOS functionality timer not working correctly
32487175 3 8.5.0.0.0 HomeSMSC:Incorrect encoding of reportSmDeliveryStatus message by proxy MP
32484026 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:actSetName not updated in nppsrs with PUT in GUI
32482530 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:Generic name is getting display incorrectly in the generic name GUI screen
32482334 3 8.5.0.0.0 HomeSMSC: Phase2: NO event has raised when sending SRI-SM-ACK message for which 'Message Length' in TCAP part is NOT correct
32477461 2 8.5.0.0.0 HomeSMSC: Observed vstpservice boot when sending MO-FSM messages at 100 TPS such that SCCP Validation Failed and default action=Udts was configured.
32476929 4 8.5.0.0.0 Incorrect structure used for memset size
32476925 4 8.5.0.0.0 Hard coded calculation for memcpy size
32476792 4 8.5.0.0.0 vSTP: GUI - No GTA addresses filtered when using "Filter LIKE <GTA_ADDRESS>"
32468714 3 8.5.0.0.0 HomeSMSC:VstpSMSProxyMTSMMsgDiscard not pegging in case of VLR decoding error in SRI-ACK
32467933 2 8.5.0.0.0 Tcap_Dec_enh: Message is not getting discarded when sending a message with invalid length of ACN.
32462501 2 8.5.0.0.0 HomeSMSC: Getting DEOCDE ERROR when sending MOFSM message with Package type as CONTINUE
32457476 2 8.5.0.0.0 HomeSMSC: Getting vstpservice boot when 2 TPS MT-Spoofing successful calls are running and in parallel 200 TPS only MT-FSM messages are running.
32452863 2 8.5.0.0.0 HomeSMSC: Inconsistent MTFSM processing in case of SCRAMBLED IMSI MISMATCH
32452701 2 8.5.0.0.0 HomeSMSC: vstpservice process is getting booted If SRISM message was sending without CGPA and Discard action has configured (Phase-2)
32440096 4 8.5.0.0.0 Enhance ASN.1 decoding to restrict additional octets in TCAP layer
32438439 3 8.5.0.0.0 HomeSMSC: Incorrect behavior observed If sending MT-FSM message with SMRPOA tag other than 0x82
32433337 3 8.5.0.0.0 HomeSMSC: Hex digits are not shown for SMRPOA address in event vstpservice#70454
32433280 3 8.5.0.0.0 HomeSMSC: Incorrect behavior observed If OTID and DTID are NOT same in SRI-SM and SRI-SM-ACK.
32433261 3 8.5.0.0.0 HomeSMSC:Incomplete content in event vstpservice#70450 Error Cause = SCRAMBLED IMSI NOT FOUND
32433242 3 8.5.0.0.0 HomeSMSC: Incorrect event raised in case of IMSI length in MT-FSM message is not equal to 14/15
32433128 2 8.5.0.0.0 MOFSM Discard and Encoding pegs/ATH are getting raised in Performance scenario
32428801 3 8.5.0.0.0 HomeSMSC: Incorrect Event raised If VLR tag is other than 0xA0 in SRI-ACK
32427958 3 8.5.0.0.0 Separate TX measurement for MTFSM packet at SS7 MP when CDPA matches with ProxyGT digits
32427939 3 8.5.0.0.0 Create similar measurement for MO case VstpSMSProxySRISMSucc and create one for TID failure.
32427927 3 8.5.0.0.0 Delivery report TX handling at SS7 MP flag , proxy digit checking opcode based, measurement handling and changes at proxy when CDPA does not match Proxy Digits
32427018 2 8.5.0.0.0 M2PA link went down with reason "M2PA Delayed Acknowledgement Timer(T7) Expired¿ after 4-5 hours on long duration run
32420441 3 8.5.0.0.0 HomeSMSC:VstpSMSProxyMOSMMsgDiscard meas not pegged with MO-FSM CGPA BlockList
32419209 3 8.5.0.0.0 HomeSMSC: Inconsistent behavior of measurements VstpSMSProxyMTSMTx and VstpSMSProxySRISMTx.
32418796 3 8.5.0.0.0 HomeSMSC: Incorrect behavior If SRI-SM message is sending without CGPA digits in case of MT-Spoofing.
32412620 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:Invalidate gname entries with preceding spaces, succeeding spaces and only spaces
32406573 3 8.5.0.0.0 HomeSMSC: Unexpected issues obsrvd in case of default action UDTS and TCAPERR
32402134 3 8.5.0.0.0 HomeSMSC: MTFSM functionality change in case of MTFSM CDPA is NOT proxy GT
32400589 2 8.5.0.0.0 HomeSMSC: Getting vstpservice boot in case of SRI-ACK decoding in case of MT-FSM successful scenario
32400562 2 8.5.0.0.0 HomeSMSC: vstpservice getting booted when successful scenario is running with 10 TPS only for MO-FSM processing
32397331 3 8.5.0.0.0 HomeSMSC:MOFSM incorrectly processing the Incorrect IMSI tag
32397271 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:Incorrect default value of GenericNameSet in linkset MO
32393565 2 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh: Message is getting relayed instead of discard by tifgnbl SA
32393086 3 8.5.0.0.0 vSTP_SIG: Buffer size need to be updated as there is traffic loss at 20K TPS
32380689 3 8.5.0.0.0 vSTP_Mul : In vital logs information for "Translation Found" is coming
32375866 3 8.5.0.0.0 KPI and Perfomance Measurement support on VSTPService
32371383 2 8.5.0.0.0 HomeSMSC: Observed inconsistent behavior among the Service MPs.
32370662 2 8.5.0.0.0 HomeSMSC:Observing vstpservice boot in case of opcode other than MT-FSM received at proxy MP
32366315 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh: Unable to perform Edit Operation Using Gname GUI for Gname having #&+ special characters
32353741 3 8.5.0.0.0 HomeSMSC: VstpSMSProxyMOSMSccpValSucc measurement is NOT getting pegged under System-Wide
32353333 3 8.5.0.0.0 HomeSMSC:Inconsistent behavior in case vstp receives SRISM message with dialog portion missing
32353322 3 8.5.0.0.0 HomeSMSC:Default action TCAPERR not working correctly in case of MT-FSM validation failed scenario
32349436 2 8.5.0.0.0 HomeSMSC: vstpservice booted when sending MO-FSM messages at 10 TPS and NOT sending SRI-ACK
32348907 2 8.5.0.0.0 HomeSMSC: VSTP process booted in case of MT-FSM processing
32344023 3 8.5.0.0.0 Observed Major alarm "CFG-DB Validation Error" after updating the IP address of existing Localhost
32343558 3 8.5.0.0.0 HomeSMSC: Incorrect event raised in case of MT-FSM validation Failed scenario
32343529 3 8.5.0.0.0 HomeSMSC: NO event raised in case of IMSI length in SRI-ACK is not equal to 14/15
32343507 2 8.5.0.0.0 HomeSMSC: vstpservice process booted in case of SRISM CGPA is configured as BlockList in SMSCSTATUS MO
32343444 2 8.5.0.0.0 HomeSMSC:vstpservice process booted in case of MT-FSM success scenario
32343406 2 8.5.0.0.0 HomeSMSC:MOFSM processing NOT working correctly in case of segmented MOFSM XUDT messages
32338564 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh: MMI Issue in GET and DELETE operation of genericname MO
32328912 3 8.5.0.0.0 HomeSMSC:Mandatory parameters are missing from event vstpservice#70450
32322426 3 8.5.0.0.0 MBR is NOT working for ATI-ACK and PSI-ACK with dialogue response tag 0X61
32322420 3 8.5.0.0.0 ATI-ACK is not getting decoded if optional user information is present in dialogue portion
32319968 2 8.5.0.0.0 HomeSMSC: Getting vstpservice boot when sending MO-FSM with MAP version other than 3
32319526 3 8.5.0.0.0 HomeSMSC: Message should be simply discarded at Proxy MP if there any Decoding Error found in MO-FSM or SRI-ACK packets
32309870 3 8.5.0.0.0 HomeSMSC: smscstatus MO AllowList and BlockList functionality change for HOMESMC feature
32309843 3 8.5.0.0.0 HomeSMSC:MtfsmInvkTimer expiry event along with meas. pegging needs to be enabled
32309465 3 8.5.0.0.0 HomeSMSC: Incorrect event in case of Scrambled IMSI mismatch
32309358 3 8.5.0.0.0 HomeSMSC:MT-FSM validation NOT working correctly
32298331 3 8.5.0.0.0 HomeSMSC: Unable to update smscstatus MO
32297671 3 8.5.0.0.0 HomeSMSC: TCAP-Error is not sending to Originator whenever default action (Tcaperr) triggered.
32296869 2 8.5.0.0.0 HomeSMSC: vstpservice process got restarted and abterms when sending messages at 10 TPS
32296600 4 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh: TIF Enhancement GUI Issues
32292223 3 8.5.0.0.0 HomeSMSC:Changes in messages received and transmitted by vSTP for MT-FSM processing
32282716 4 8.5.0.0.0 VSTPSERVICE_Proc process showing on NOAM
32281767 3 8.5.0.0.0 Performance Improvement for support of Reserved tps (Link Tps) and Max Link Tps for Link in Linkset in vSTP.
32266550 4 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:Enhance TIFRDNBL SA TRACE
32256006 4 8.5.0.0.0 EAGLE Instances in vSTP Document
32251687 3 8.5.0.0.0 Observed error "AS notification is applicable only if adapter type is m3ua" if user edits M2PA & Mtp2 type of Linkset
32251366 4 8.5.0.0.0 vSTP_XUDT: Value of allowedFirstSegLen is not getting changed to 0
32251058 3 8.5.0.0.0 HomeSMSC: GTT hierarchies are NOT working with SRI-SM GTT translation.
32250536 3 8.5.0.0.0 HomeSMSC: CDPA PC=0 in UDTS when applying default action and Sending UDTS to Originator
32245172 3 8.5.0.0.0 HomeSMSC:Incorrect event structure for event vstpservice#70447{Service Validation Failed}
32245042 3 8.5.0.0.0 HomeSMSC: CDPA PC and CGPA PC both are same in TCAP Error when applying default action and sending TCAP-Error to Originator
32240797 2 8.5.0.0.0 vSTP : Max 10K traffic is getting transmitted from vSTP
32232779 2 8.5.0.0.0 HomeSMSC: vstpservice process restarted IF Validation Failed and default action=Udts applied.
32232084 2 8.5.0.0.0 HomeSMSC:Obsrvd vstpservice boot with 14 digit imsi length and successful validation case
32232061 2 8.5.0.0.0 HomeSMSC: MOFSM validation not working correctly in case of 15 digits IMSI length
32222405 3 8.5.0.0.0 vSTP_MulCom : Different behavior to handle 4 Opcode message for ANSI and ITUI domain
32215394 3 8.5.0.0.0 Incomplete TCAP data is printed for Event 70445.
32206437 3 8.5.0.0.0 HomeSMSC: MO-FSM message should be processed as per the SMSC Status entry for HEXA-Decimal digits
32206234 3 8.5.0.0.0 HomeSMSC:Incorrect proxy MP processing in case of XUDT segmented MOFSM messages
32192889 3 8.5.0.0.0 HomeSMSC:No decoding error generated from invalid message scenarios
32192437 4 8.5.0.0.0 Observed sev 4 during get operation on linksets MO.
32192398 3 8.5.0.0.0 HomeSMSC: NAI value of SMRPOA from the incoming message (MO-FSM) has ignored IF DefCC=None in VstpSMSProxyOptions
32191057 3 8.5.0.0.0 HomeSMSC:SRISM generated in case of GTI=0 in SCCP CG part
32188453 4 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:Incorrect trace output of TIFLSBL
32174588 3 8.5.0.0.0 HomeSMSC: Service MPID should be in decimal format only when appending in CGPA to generating SRI-SM.
32173877 3 8.5.0.0.0 HomeSMSC: MMI: Not able to update single or few parameter in SMSC ProxyOptions MO
32169213 3 8.5.0.0.0 HomeSMSC: Issues found on SMSC Status MO
32169185 3 8.5.0.0.0 HomeSMSC: Issues found on SMSC ProxyOptions MO
32169006 3 8.5.0.0.0 HomeSMSC:Incorrect SRI-SM encoding
32168982 3 8.5.0.0.0 HomeSMSC:MMI Issue in "Sccpoptions" MO
32168924 3 8.5.0.0.0 HomeSMSC:ServiceMP Message Validation Decoding Error in case of 12 digits IMSI in SRI-ACK
32149732 3 8.5.0.0.0 Support of Reserved tps (Link Tps) and Max Link Tps for Link in Linkset in vSTP.
32135888 3 8.5.0.0.0 XUDT Reassembly procedure shall be discarded when First Segment length is less than Configured length
32134572 4 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh:RAML needs updation /vstp/nppservices for new SAs
32134530 3 8.5.0.0.0 8.5.0.0.0.0.1_TIF_enh: actSetName not updated with PUT when fdl="any value"
32130808 3 8.5.0.0.0 Observed error "Family/Opcode :[Error Code 002] - Invalid Syntax" while editing opcode gta translation with family=*
32122700 3 8.5.0.0.0 Parameter "allow multiple components" 's value "NO" is getting accepted while configuring GTA entry for other than opcode GTTSETTYPE
32120976 3 8.5.0.0.0 In VSTP GUI Parameter "Allow Multiple Components" has only two value either Yes & No
32115750 3 8.5.0.0.0 Parameter "checkmulcomp" are getting displayed with all type of GTTSETS on retrieval of GTTSET table
32104415 2 8.5.0.0.0 Abterm files are getting generated on VSTP MP server after doing fresh install on latest release 8.5.0.0.0.0.0.1_91.1.0
32101395 2 8.5.0.0.0 vSTP SFAPP (SS7 FW) - ATI_ACK Decoding Error
32078380 3 8.5.0.0.0 Module testing issue fixes vSTP TIF Enhancement
32077037 4 8.5.0.0.0 Change in MTP3 Configs user documentation.
32076737 4 8.5.0.0.0 MMI/GUI for TCAP Multicomponent MO
31993819 3 8.5.0.0.0 Not able to modify the entry in NPP Service Table
31869913 4 8.5.0.0.0 R8.5.0.0.0_ST:Incorrect information in /vstp/remotesignalingpointstatus MO
31862788 3 8.5.0.0.0 R8.5.0.0.0_ST: asNotification adding as default parameter for Mtp2 type linksets
31808634 4 8.5.0.0.0 [vSTP]: Buffer overflow by one
31646904 3 8.4.0.0.0 MP_Perf: Performance rate of 5K TIF & 8GTT not working
29373957 4 8.4.0.0.0 MMI allows nsfi=aftdstn for si=1 and si=2 for SIO MTP screening rules, whereas not for SI>=3
29226921 4 8.4.0.0.0 [MMI] - /vstp/featureadminstates - RAML document should be updated for supported GET/PUT Operations
27301480 3 8.5.0.0.0 Configuration of TCAP GTT entries
25975473 4 8.1.0.0.0 M2PA link status gets displayed as UP though its down

VNFM

Table 7-7 VNFM 5.1.0.0.0 Resolved Bugs

Bug Number Severity Found in Release Title
32447038 3 5.0.0.0.0 Dual IP Stack Support for Diamter+SBR flavor for Signaling Stack
32447086 3 5.0.0.0.0 VNFM Support to Custom Size vDSR Instantiation
32427559 3 5.0.0.0.0 TSA Password removal in logs
32395396 3 5.0.0.0.0 Cloud-Init Improvements
32483811 3 5.0.0.0.0 Cloud-init Restart Comcoal services in case of DB Reinitialization failure
32318725 3 5.0.0.0.0 Cloud-Init Fix for VNFM
32535846 3 5.0.0.0.0 Heal For Active NOAM
32451983 3 5.0.0.0.0 TSA not getting configured for multiple XSI and same network
31929737 4 5.0.0.0.0 Nessus Scan on VNFM 5.0.0.0.0 Bug: HSTS Missing from HTTPS Server
32451147 3 5.0.0.0.0 Uplift of four 3rd party SW - Swagger Annotations, Common IO, CommonsLang, SwaggerCore
31801964 4 5.0.0.0.0 SSH Server CBC Mode Ciphers Enabled
32179979 3 5.0.0.0.0 Retry Mechanism of MMI call for large Profile
32319315 3 5.0.0.0.0 Adding Openstack pre-requisite for creating stacks on cloud using VNFM
32071538 3 5.0.0.0.0 Modify VNF URL fix
32084222 3 5.0.0.0.0 IDIH Deployment via VNFM 4.5 is failing
32056882 3 5.0.0.0.0 Discover REST request fails on Secondary VNFM
31982320 3 5.0.0.0.0 VNFM Deployment of Dual Stack should have same Vlan Id for all Interfaces

SCEF

None.

Release 8.5.0.0.1

DSR

Table 7-8 DSR Release 8.5.0.0.1 Resolved Bugs

Bug Number Severity Found In Release Title
32202445 4 8.5.0.0.0 IPFE Target Sets MMI should prevent the short form of IPv6 Addresses to enter in DB
32267080 3 8.5.0.0.0 ATS to configure TSA

vSTP

None.

VNFM

Table 7-9 VNFM 5.0.1.0.0 Resolved Bugs

Bug Number Severity Found in Release Title
32180639 3 5.0.0.0.0 GEO Redundant VNFM is unable to change state hosted in different AZ of different tenants.

SCEF

None.

Release 8.5.0.0.0

DSR

Table 7-10 DSR Release 8.5.0.0.0 Resolved Bugs

Bug Number Severity Found In Release Title
31941547 3 8.4.0.0.0 Connection Capacity Dashboard display issue
31912155 3 8.4.0.0.0 Reserved Ingress MPS cannot be increased after the Capacity Configuration Set is created
31884939 3 8.4.0.0.0 The Answer Result-Code parameter value is not present when editing the PRT rule
31875702 4 8.4.0.0.0 ETL (Egress Throttle List) is not loaded successfully
31868064 4 8.4.0.0.0 edition of mediation screen throwing error
31814654 3 8.5.0.0.0 VSTP: Action Sfthrot not discarding messages
31725516 2 8.4.0.0.0 DSR: License Measurement loops create Thread Watchdog timer expiry in License Meas thread
31718618 3 8.4.0.0.0 Issue in globaltitleaddresses MO with startAddress and endAddress fields
31679934 3 8.4.0.0.0 Primary and Secondry VNFM instances show Primary status.
31677837 3 8.4.0.0.0 DSR is crashing after upgrade to 8.4.0.0.0.0.5 while enabling CAF application.
31659938 4 8.4.0.0.0 For IpfeResponder connections GUI showing wrong status when connections are disabled
31655908 4 8.1.0.0.0 SOAM Dashboard is inaccessible after the upgrade
31642637 2 8.4.0.0.0 The value None or none should be streamlined for all the parameters in sccpmnpoptions MO
31631390 3 8.4.0.0.0 Enhance GUI window local server gp. under remote server
31623680 2 8.4.0.0.0 MP_Perf:VstpTxM3RLBufOverflow with Changeback
31623211 3 8.4.0.0.0 Update/Edit command should not be supported for CAT2IMSI and CAT2GTA tables
31622721 3 8.4.0.0.0 View Trap Log Report All, returns an empty screen
31582503 4 8.4.0.0.0 Inconsistancy among different MO GUI screens
31534423 4 8.4.0.0.0 The Help page is not visible for GUI screens
31483158 4 8.4.0.0.0 SBR Database Disable to Prepare Error on DSR
31470920 3 8.4.0.0.0 Signaling VNF Configuration Changes to support higher VNFCs
31438018 3 8.1.0.0.0 Export all of sudden stopped working towards Remote server
31437005 3 8.4.0.0.0 Update of Boolean variables in SDS Options not stored in database
31322115 3 8.4.0.0.0 DAMP Abterm during FABR overnight run
31322013 3 8.4.0.0.0 ASG Upgrade enhancement to handle the post upgrade validation failure
31321990 3 8.4.0.0.0 apwSoapServer is restarting because of Process Watchdog Failure
31205564 3 8.4.0.0.0 Cannot turn on 16-Priority Feature -- [Error Code 19176] - The Available Alarm Budget cannot be less than 0
31205319 3 8.4.0.0.0 error while running command verifyUpgrade
31102906 4 8.2.0.0.0 DSA || PreLocChkExecFailedAlrm occurred in Customer Environment
31088281 4 8.4.0.0.0 MMI: eventid filtering for resource /mon/alarmseventshistory should get all data
31068525 3 8.3.0.0.0 DSR SOAM GUI Slowness
30966560 4 8.4.0.0.0 Remove references of default GUI password from code
30920090 3 8.4.0.0.0 vSTP_SFAPP: Measurement counter VstpTxSfappMsg is not pegging
30248920 3 8.4.0.0.0 DSR 8.4.0.0.0: changes in Alarm Threshold Options in DSR SOAM System Options Gives error
29506202 4 8.4.0.0.0 Appworks MMI bugs
29490967 4 8.2.0.0.0 KPI export not working when specifying Time of Day
29375352 4 8.4.0.0.0 VSTP_8.4.0.0.0_ATINP_FT:Duplicate entries getting added in /sccpapplications/status MO.
29192695 2 8.2.0.0.0 Millisecond section of Start Time and Stop Time fields of any trace always shows zero
26645942 3 8.2.0.0.0 Security Log History: some entries are with UNKNOWN Screen
25643859 4 8.0.0.0.0 GUI: SBR Status screen repeating display of server groups with >25 SGs.
25525005 3 8.0.0.0.0 Data Export Transfer Now and Test Transfer does not provide feedback to the user
25231844 4 8.0.0.0.0 Selecting Edit button with keyboard takes you to a blank screen
24616310 4 8.0.0.0.0 Radius: Network Options - browser cookies store shared secret
2647890 3 8.2.0.0.0 VSTP does not show overall Destination route status for a Destination Routeset
31875702 4 8.4.0.0.0 ETL (Egress Throttle List) is not loaded successfully
31864238 3 8.4.0.0.0 Main Menu: Policy and Charging > Maintenance > Policy Database Query. search button click not working
31769687 3 8.4.0.0.0 Unable to Add DataExport by using Hostname through DSR GUI
31559296 3 8.5.0.0.0 var partition size needs to be increased on DSR systems

vSTP

None.

VNFM

Table 7-11 VNFM 5.0.0.0.0 Resolved Bugs

Bug Number Severity Found in Release Title
31605235 3 5.0.0.0.0 Active Noam server check in cloud-init
31914919 3 5.0.0.0.0 VNFM Routes for Ethernet Interfaces
31848493 3 5.0.0.0.0 VNFM 4.5.0.0.0.0.0.0.0.0.0_45.5.0.0.0.0 medium profile does not support 4 MPs
31818991 3 4.5.0.0.0 VNFM PI-C 45.5 Swagger issue after reboot
31047829 3 4.3.0.0.0 VNFM creating un-required server groups (SGs) for DSR/SDS
31654839 4 4.5.0.0.0 VNFM support for GEO Redundancy - Rsync operation failed
30942616 3 4.3.0.0.0 Swagger IP is not accessible when snmpReceiverAddress is kept IPv6
31915041 3 5.0.0.0.0 Apache Tomcat to be upgraded from 9.0.36 to 9.0.37
31801934 4 5.0.0.0.0 Apache Tomcat Default Files should not be available
31801907 4 5.0.0.0.0 TLS Version 1.0 Protocol Detection
31789770 4 4.5.0.0.0 Modify VNF Bug Fix
31795880 3 4.5.0.0.0 VNFM support while adding TSA VIPs on the SOAM behaving unexpectedly

SCEF

Table 7-12 SCEF 8.5.0.0.0 Resolved Bugs

Bug Number Severity Found in Release Title
OCSG (DSRAPIGW)
29685488 3 8.4.0.0.0 SCEF - Validation of IP address against the AF identifier in the AF traffic
29685459 3 8.4.0.0.0 SCEF support for rate limiting based on monitoring event type
29959511 3 8.4.0.0.0 MP Failover Scenario not working as expected in VMWare
30106328 2 8.4.0.0.0 Support for MYSQL DB at SCEF API Gateway
30106306 3 8.4.0.0.0 PSK support for IP data delivery ( MQTT)
30231451 3 8.4.0.0.0 OCSG CustomSLA ME fix
30106318 2 8.4.0.0.0 MQTT - Support for MT messages
30106340 2 8.4.0.0.0 HA support,APN rate control, IPDD measurements, AAA server integration
30133372 2 8.4.0.0.0 CDR support for IPDD
30314772 3 8.4.0.0.0 SCEF APIGW: SCS AS Address field in CDR has LoadBalancerIp
30314712 3 8.4.0.0.0 SCEF APIGW : No extID in CDRs with unsuccessful Result-Code
30676651 3 8.4.0.0.0 SCEF: no ExternalID in CDR records for MT from buffer notifications
30980891 3 8.4.0.0.0 OCSG AAA Responds with Application Not Supported Error
31211943 3 8.4.0.0.0 SCEF: IP GW answers with 5001 on receiving ACR from MME
31558749 3 8.4.0.0.0 SCEF MQTT: Buffered Message Delivery Status Notification needs correction
31558679 3 8.4.0.0.0 SCEF MQTT: Monitoring Event Notification should contain ExternalID and topic
31523660 3 8.4.0.0.0 SCEF MQTT: Unclear answer on MT data buffering
31491694 3 8.4.0.0.0 SCEF MQTT: IPGW always answers with 5012 UNABLE_TO_COMPLY error
31491539 3 8.4.0.0.0 SCEF MQTT: Broker answeres with Connection Refused, Server unavailable“
31426224 3 8.4.0.0.0 SCEF: AVPs Accounting-Record-Type and Accounting-Record-Number are missing in IPGW response
31244192 2 8.4.0.0.0 Troubleshooting tool based on UE identifiers IMSI/MSISDN/Ext.Id - Device status through SBR and MYSQL DB
DSR
29806711 3 8.4.0.0.0 Generic Bug of DSR 8.2 and 8.3.0.0.0 fixed in DSR 8.4.0.0.0 (29645981, 29686410, 29686558, 29686309)
29717110 3 8.4.0.0.0 SCEF Logging Feature for MTS
29708522 4 8.4.0.0.0 SCEF does not have MMI support for 'supportedFeatureListId' parameter in SCEF Options table
29647866 4 8.3.0.0.0 SCEF MMI documentation : Need to remove parameters which are not in use
29946848 3 8.4.0.0.0 Monitoring Event Number of UEs not sending error HTTP response
30048895 4 8.4.0.0.0 SCEF PDN Establishment option shows 'Unknown' in the log
30048869 4 8.4.0.0.0 SCEF Nidd log the PDN establishment time is not updated
30105799 3 8.4.0.0.0 SCEF sending Notifications to Appservers which are down. Does not retry sending after checking
30190315 3 8.4.0.0.0 SCEF: NIDD context can't be edited/deleted after PATCH with duration change in NIDD config
30342479 3 8.4.0.0.0 SCEF: Error during GET NIDD
30309559 3 8.4.0.0.0 SCEF: Increase MaxAuthDuration maximum value in NIDD Configuration Set
30256240 4 8.4.0.0.0 SCEF NIDD KPI Enhancement for MTS Russia
30358976 3 8.4.0.0.0 SCEF does not validate user identifier for MT requests
30314304 3 8.4.0.0.0 SCEF MONTE is using User identifier in RIR required to use only Scef Reference Id
30482530 3 8.4.0.0.0 Thread watch dog failure for stack task of Deir Processes
30483334 3 8.4.0.0.0 MMI command mon/alarms/{id} produces error Forbidden.
30725222 3 8.4.0.0.0 SCEF: MT NIDD Notification has status instead of deliveryStatus
30676682 3 8.4.0.0.0 IP address of App servers should not be returned in response
30712311 3 8.4.0.0.0 SCEF | MONTE 'Availability after DDN failure': maximumNumberOfReports
30991838 3 8.4.0.0.0 SCEF: NIDD MT delivery Notification is not sending User Identifier value to Appserver
30957564 3 8.4.0.0.0 SCEF MONTE is using User identifier in RIR required to use only Scef Reference Id
30957798 3 8.4.0.0.0 SCEF: There is no required counter for Amount of messages in buffer (KPI)
30957503 3 8.4.0.0.0 SCEF: Maximum values for maxPacketBufferSize and dataDuration need to be changed
31604692 3 8.4.0.0.0 SCEF : Enhance and provide a Device Info debug tool
31863698 3 8.4.0.0.0 SCEF Bump up the upgrade loaders to execute in 8.5.0.0.0.0.0-90.X.X
31790516 3 8.4.0.0.0 SCEF Install loaders are not executed successfully
31328029 3 8.4.0.0.0 SCEF MMI not working for GUI display

Customer Known Bug List

DSR 8.5.X

The following table lists the known bugs and associated Customer Impact Statements. This information is provided for information purposes only.

Table 7-13 DSR Release 8.5.X Customer Known Bugs

Bug Number Severity Found in Release Title Customer Impact
32911957 3 8.5 IPv6: [Multi-Homing]: Traffic is NOT Auto-shifted to Primary XSI IP and Connection went down If Secondary IP is bring down via 'ifdown' command

This issue is specific to the scenario when the eth interface on the VM is shutdown using "ifdown" command. Other scenarios of multihoming switching are working fine.

Workaround: None

28134563 3 8.3 Auto Site Upgrade failure not cleaned up automatically, reupgrade attempt blocked

If during Automated Site Upgrade, the upgrade on a server fails due to an issue like NTP failure or greater than 70% /var usage, the customer may observe a message, site already has an automated site upgrade in progress, stating upon trying to restart the upgrade.

Workaround: Cancel the Site upgrade task from Main Menu: Status & Manage > Tasks > Active Tasks screen. Then, restart the upgrade.

28353971 3 8.3 OCSG does not validate special characters in ScsAsId delimiter

If customers enter special characters in SCSASID_APN_Suffix_Delimiter in the OCSG console, the URL is rendered incorrectly.

Workaround: APIGW user document will describe the constraint on the delimiter configuration parameter.

28435966 3 8.3 Invalid notification sent if DRR is with missing Absent-Subscriber-Diagnostic-T4

If an SMSC sends a DRR with invalid SM-Delivery-Outcome-T4 AVP value as '0' but missing 'Absent-Subscriber-Diagnostic-T4' AVP, the SCEF Notification report will not be correct.

Notification report:

/daf-network/apigw/v1
{    
    "msisdn":"98873983003",
    "result": "Unknown
      
DeviceTriggeringDeliveryResult: 255"
}

Workaround: None

28545072 3 8.3 Duplicate OID name in DSR MIB (eagleXgDsrDbHealthImpactNotify)

There is a duplicate name DbHealthImpact for different OIDs, which will cause an issue when trying to load the MIB file into the SNMP server.

Workaround: In the MIB file, edit the OID name for the 31151 event from DbHealthImpact to DbHealthImpactPersist.

26939388 3 8.2 SDS Upgrade: NOAM Servers shall not switchover while Auditing is in progress

None, if the documented workaround is followed.

Workaround: NOAM upgrades are manual upgrade, and the documented procedure instructs the operator to look for the Audit clearance Alarm.

26969222 3 8.2 EVENT_NUMBER: 31000 GN_INTERN/WRN Upload failed [FileUploader.cxx:123] post 8.2 Minimal impact is the problem that occurs. The alarm may cycle a few times and then clear after the system retries file transfer. This has only been observed in one test system and did not have a long-term impact on the system.
27087175 3 8.2 Device Deployment Failed alarms on IPFEs while upgrading from 7.1.1 to 8.2

In the unlikely event that the TPD provd server is down, and we happen to have a device edit pending, the edit will be blocked and an alarm is raised. (Bug title reflects an instance where this has happened once in the test cycle.)

Workaround: Perform a trivial edit to the device; this will retry the edit operation with tpdprovd.

27355369 3 8.2 [8.2ST]: ERA process restart observed on NO while upgrading SDS 7.3 to 8.2

During the SDS upgrade, after the switchover from the primary cluster to the upgraded cluster, users provisioned data. Abterms were observed for a process, which monitors provisioning tables, however, the process is independent of provisioning.

Workaround: None. The issue occurred once in a partial upgraded system. There is no traffic impact on SDS. The affected process recovers from abterm automatically.

27413746 3 8.2 SNMP Trapping screen issues for SNMPv3 Engine ID field

Users cannot view generated SNMPv3 Engine ID on the SNMP Trapping screen.

Workaround:

1. Navigate to Configuration > Networking > Networks.

2. Check the default network name for NOAM/SOAM according to the requirement (for example, to configure SNMP trapping for the NOAM/SOAM server group, "XMI" is the default network name).

3. Execute the command: ip link | grep -A1 <network name> | grep ether | awk '{print $2}' on NOAM for NOAM SG and on SOAM for SOAM SG where <network name> is text from step 2. The expected output of the command is formatted like: 
02:2a:84:bc:81:0c

4. Remove all of the colons (:) from the output of step #3 and concatenate it after "800001430c" for the engine ID. For example:

800001430c022a84bc810c
26710183 4 8.2 RE when edited to remove the destination, should not be saved

If an RE is edited and all destination are set to None, then any FABR queries to this particular RE will fail (ATTACH failures will be observed).

Workaround: None. As a note: for any FABR query to pass, a valid destination must be assigned to an RE.

27182197 4 8.2 [8.2FT]: Domain ID field in filter gets disabled after filtering it once In Main Menu: SDS > Configuration > Subscribers screen, after filtering on Domain ID, if the page is reloaded, the Domain ID text box is greyed out and disabled.
26116286 3 8.1 USBR update and concurrentupdate stackevent resets the creationTime to 0 If any DCA application uses update API or concurrentUpdate API, the creation time of a USBR record will be reset to 0. So, the DCA application business logic cannot rely on the USBR record creation time. However, there is currently no requirement of DCA applications developed so far to use the record's creation time.
26186891 3 8.1 8.1 VSTP-ST:Obs Routing fail events for UDTS msg without mentioning its UDTS Minimal impact. The fix would help in debugging messages discarded at MTP3 due to routing failure. With fields currently reported in event 70064, users will not be able to differentiate whether UDT/XUDT or error message like UDTS/XUDTS. Additional fields will help in troubleshooting which messages are being discarded by MTP3 due to routing failure.
26243446 3 8.1 Information showing as green even though HostName is incorrect No functional impact. Error text is displayed with a green background.
26290407 3 8.1 8.1 Maj Upg NOAM "10134 Server upgrade operation failed", but upgrade succeeded There will be a false alarm, but the upgrade will still be in progress. Upgrade progress can be verified from the Upgrade Screen. Moreover, Upgrade logs can be verified to see the progress of the upgrade.
25573507 4 8.1 [DSR SSST 8.1] IPFE validation missing in IPFE > Configuration > Options screen If a wrong IP address is used, then TSA will not work. This will only happen when operator is configuring the IP address incorrectly. In field, operator shall use the correct IP address and verify the configuration before starting the traffic.
25737480 4 8.1 [DSR SSST 8.1]When we insert device, XSI IPv4 address replaces with IPv6 address. Operators will not be able to add two devices at the same time
26188293 4 8.1 [DASH:P&C] DSR Dashboard PCA Avg Ing MPS instead reported as RxPdraMsgRate The Dashboard screen does not include OCDRA MPS, it is showing only PDRA MPS. SBR Sessions under Servers tab SBR Sessions field is not including OCDRA Sessions count.
26270776 4 8.1 Process Util spikes seen for pingAllLivePeer and iptablesAdm

This has no impact on the advertised performance figures.

While testing the smallest VM resource profile, such as 4 vCPUs/8G RAM), we observed an anomaly wherein pingAllLivePeer, and iptablesAdm tasks result in CPU spikes. The bench-marked/ advertised MPS, that is, 6K RBAR MPS per DA-MP) has already considered these spikes and runs fine with this anomaly.
26313885 4 8.1 DSR 8.1:ST: Status & Manage > Files is not accessible from NO & throw error

In NOAM and SOAM when there will be a large number of files present inside File Management Area (/var/TKLC/db/filemgmt) and the user clicks on "Status & Manage

> Files" option on GUI for that server, then apwSoapServer will become slow as it will utilize the max CPU to sort the files in memory. This will impact the apwSoapserver functionality as well as that overall server performance. This is limited to OAM servers and will not impact Signaling Servers. This is a legacy issue.

This issue occurred because Remote Server Copy was not deleting the files after copying them to the remote server. A separate Bug will be raised to address this issue.
24564563 3 8 Network Devices added via GUI or MMI become "Discovered" on delete

No operational impact. The issue is transient and clears on its own.

Workaround: None.

24796935 3 8 [AW:oampAgent] "DB Late Write Nonactive" alarm by NO during Act->Stby transition

No operational impact. Alarm may be triggerred when switchover of NOAM occurs.

Workaround: None.

25505595 3 8 DSR 8.0:ST: InstallOS op on guests using PMAC failed with reason as internal err

No impact to traffic. Filesystem full could prevent normal operations such upgrades or addition of new servers. The filesystem full condition was a result of an ISO being copied into an incorrect location (home/admusr).

Workaround: Delete extra files that have been incorrectly copied to

/home/admusr. This will clear the alarm and allow normal operation.
25529974 3 8 DSR MMI Issues in AppWorks MON URIs None. Measurement budget is not currently enforced.
25575141 3 8 [PDRA:Recon] Disabling PDRA during USBR Recon fails with Error code 21648 Users will not be able to disable PDRA function while running a reconfiguration plan for a USBR database. Users can disable function after all reconfiguration plans have been completed.
25637633 3 8 Unknown column 'ROLE' in 'where clause'

Minimal impact as filter is not typically used for System OAM during upgrades. User will receive error "Unknown column 'ROLE' in 'where clause'", when filtering on Server Role "System OAM" through the Main Menu: Administration > Software Management > Upgrade screen.

Workaround: Users can navigate to the desired System OAM tab to get the data.

25651803 3 8 [PCA:CACD] Alarm for Degraded ComAgent Conns when USBRs removed from Session RD

No functional impact. Alarm is raised for servers that do not belong to the active Session SBR Database.

Workaround: To clear the alarm, restart the SBR servers on which the alarm is raised.

CAUTION: If any DCA application is actively sending data to these SBR servers, this workaround is NOT recommended as it may cause traffic loss.
25656089 3 8 DSR8.0:ST: ISO deployment got stuck for the site when servers got restarted

During preparation for upgrade activity, if the user reboots a server while an ISO transfer is taking place, the transfer will be stopped and will not restart until a manual workaround is performed.

Workaround: Contact My Oracle Support for assistance.

25669402 3 8 DSR 8.0:ST:VIPs not activated when servers are in same network but diff sites

If all SOAM servers (different sites) are in the same network, users will not be able to access SOAM using VIP when spare SOAM server becomes active.

Workaround: is available.

25719122 3 8 [PDRA:ApplRestart] psbr abterm can occur during controlled shutdown/restart No service/traffic impact. An abterm may be generated during the process restart through GUI (Status&Manage > Server).
25730821 3 8 [ISBR:HaRes] SBRs may fail to de-register COMCOL Resources when removed from RDs

No impact to traffic since this issue was observed on a decommissioned server group that is not a part of resizing plan. Also, there should be no operational impact as MOP source documentation has been updated to the required cleanup of decommissioned Servers and Server Groups.

Workaround: If there are any Servers and Server Groups which are no longer being used after the completion of a Resizing plan, then the user should delete them.

23421644 4 8 [AW]Log In button not centered in the box at the Login Screen in Firefox browser No operational impact. Cosmetic issue only.
23858799 4 8 Local Pause Update Inconsistent No operational impact. On several GUI screens, there are two Pause Updates check boxes, one with scope global to the GUI and the other with a scope local to that menu item.
24377541 4 8 [Network Insert Screen]: VLAN ID field should not be mandatory In the Main Menu > Networking > Networks [Insert] screen, users will need to populate the VLAN ID field with a value of 1-4094 regardless of whether used or not.
24479659 4 8 IPFE Target Set issue with BIE and gcli Exported IPFE files cannot be used for import operations.
24621473 4 8 The SBR HA and HA health check scripts accessing tables instead of SOAP APIs. No impact.
24935222 4 8 LRGSYS: KPI screen taking a long time to display

Potential GUI delay. On large topologies, it can take up to 90 seconds to draw the KPI screen.

Workaround: None.

25028429 4 8 DSR Backout: invalid response from User (yes vs. y) shouldn't abort CLI Session

If users do not type y or N in response to, "Continue backout? [y/N]:", there is no reason given for the abort of the backout command.

Workaround: The backout command can be re-entered.

25379612 4 8 IDIH : 80.17.2: OAM GUI showing extra Mediation input Sources

No operational impact. Extra mediation source entries may be displayed. If the IDIH has ever been modified to retrieve data from another DSR SOAM, table entries for server hosts from the other SOAM will be displayed in IDIH OAM application screen Applications > DSR>"Mediation Input

Sources".

Workaround: Disregard hosts that no longer apply to the current configuration.

25462998 4 8 Pause update not functioning on Comm Agent Screens

Minimal customer impact. The GUI status screens under "Communication Agent

> Maintenance" will continue to update when a pause update check box is

selected.
25542610 4 8 When NMS server added user may return to a screen with addtion not reported

Update may not be reflected on GUI until it is manually refreshed.

Workaround: None. Users need to navigate back to the desired screen rather than be automatically returned to it.

25584247 4 8 Misleading DCA Custom Event Template Throttling Description Misleading 'Alarm Throttling Interval' description. Minimum value is incorrect. [Default = 60; Range = 0-300] should read [Default = 60; Range = 5-300].
25616683 4 8 Capacity Summary screen constraints inconsistent with Online Help doc Online help has an inaccuracy concerning max local nodes =32 instead of 48.
25660736 4 8 Backout: SOAM returns errors with verifyUpgrade and verifyBackout.

The only impact is ERRORs may be returned when running verifyUpgrade and verifyBackout. The backout completes successfully.

Workaround: None. The backout completes successfully.

23132640 3 7.3 [DSR7.3] Issues configurating/reconfiguring PCRF records

If two sites are configured using the same SOAM Network Element, it is not possible to configure the same PCRF entry at both sites.

Workaround: Use a different SOAM Network Element at each site. During the installation, it is possible to configure two SOAM Network Elements with different names and all of the same network configuration.

29518322 3 8.4 MIX of ANSI + ITUI traffic (72K for 8 MP¿s per site) is not able to run on my performance setup, whereas same amount of traffic for just ITUI domain is running fine.

MIX traffic routing results in MSU failure, when running traffic is close to configured Link TPS.

Workaround:None

29518100 3 8.4 Few ITUI domain links got stuck in congestion level though I have reduced traffic to zero When a linkset is pushed for more traffic routing, which triggers egress congestion, and if remains under this traffic stress, where links bounce due to congestion. Some Links get stuck in congestion levels though traffic gets reduced to zero. Here, Congestion level stuck links will never route egress traffic until they get reset.
29531355 4 8.4 STP8.4_GPORT_FT: MTSMSIMSI not taking ASDDN / ASDRNDN values Resonse messages in case of GPORT cannot be encoded MTSMSIMSI as ASDDN and ASDRNDN.
29408014 3 8.4 On making the relativeCost value of Secondary entry same as relativeCost value of Primary entry, load sharing is not happening with respect to the weight.

Load sharing will not occur correctly on changing to the same cost. This could cause an early onset of congestion due to not using all available paths to load share.

Workaround: Reconfigure the MAP load sharing group by deleting the existing mapset group. Or, avoid put operation for changing RC.

31860267 3 8.5 R8.5_ST:Obsrvng VstpMsgDiscardDuetoCongestion discards during HA state change activity on MP

Message discards/loss is observed when the vSTP MP is abruptly brought down manually during live traffic, by either changing the HA state of MP to OOS, or by disabling the vstp process at MP manually. Such operations are not recommended during normal vSTP MP operation.

Workaround: None

31757106 3 8.5 vSTP_SIG: XCA and CBA message are not sent for ITUN24 domain

SNM (Signalling Network Management) messages for ITUN24 domain will not work. ITUN24 domain traffic is running fine. For other domains, SNM messages are working fine.

Workaround: None

31757057 3 8.5 [vSTP_SIG]: for ITUN24 domain, RST message is not sent when TFP message is received

SNM (Signalling Network Management) messages for ITUN24 domain will not work. ITUN24 domain traffic is running fine. For other domains, SNM messages are working fine.

Workaround: None

31588873 3 8.5 MP_Perf: Observed discards due to congestion with MTP screening traffic

The MTP Screening with wild characters is heavy operation & consuming excessive CPU causing M3RL layer to congest. System shall limit TPS to 15K per MP when MTP3 Screening is turned ON.

Workaround: Limit MTP3 Screening traffic to 15K TPS per vSTP MP for Gateway STP. No Impact for Non-Gateway deployments.

32672994 3 8.5 vSTP_SIG : During traffic at 100% TPS, links are getting down and not coming up

M2PA links may go down some time when the traffic runs at the maximum MP capacity and does not recover automatically.

Workaround: Disable and then enable the affected link from GUI/MMI to bring the link up.

32573278 3 8.5 8.5.0.1_ST:Comagent connection gets deleted in case of UDR based traffic

Comagent connections between vSTP and UDR go down for some time during high traffic scenarios. Transactions at vSTP MP may timeout and fail during such time when the connection is down with UDR.

Workaround: None. The comagent connections recover automatically.

31983406 3 8.5 R8.5.0.1:VstpM3UAEventQueue alarms on intervstp M3UA links

Queue alarms and congestion is observed while running 10K TPS traffic on one of the M3UA links.

Workaround: None. Run lower than 10K TPS per M3UA link.