IMSI Ranges

IMSI addresses are used to configure an equipment status for an IMSI range. An IMSI range is a combination of start address and end address. IMSI addresses can be used to bypass the IMEI check for certain IMSI ranges as defined by the operator.

Select the EIR, and then Configuration, and then IMSI Ranges page. The page displays the elements on the IMSI Ranges View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 4-2 IMSI Ranges Elements

Element	Description	Data Input Notes
Start Address	Start IMSI address for the IMSI range. This is used to uniquely identify an IMSI range record.	Default = n/a; Range = Valid characters are numeric only of length 15.
Equipement Status	Equipment status.	Default = n/a; Range = Blacklist, Graylist, Unknown, Whitelist
End Address	End IMSI address for the IMSI range.	Default = n/a; Range = Valid characters are numeric only of length 15.

You can perform add, edit, or delete tasks on EIRConfigurationIMSI Ranges page.

Adding a IMSI Range

Perform the following steps to configure a new IMSI Range:

1. Click Insert.

   Note:

   The new IMSI Range must have a name that is unique across all IMSI Ranges at the SOAM. In addition, the IMSI Range's IP Port combination must also be unique across all IMSI Ranges configured at the SOAM.
2. Enter the applicable values.
3. Click OK, Apply, or Cancel

Editing a IMSI Range

Use this procedure to change the field values for a selected IMSI Range. (The IMSI Range Name field cannot be changed.):

1. Select the IMSI Range row to be edited.
2. Click Edit
3. Enter the updated values.
4. Click OK, Apply, or Cancel

Deleting a IMSI Range

Use the following procedure to delete a IMSI Range.

Note:

You cannot delete a IMSI Range if it is part of the configuration of one or more Linksets.

1. Select the IMSI Range to be deleted.
2. Click Delete.
3. Click OK or Cancel.