3 Parameters

This section describes the Parameters available to the Maintenance module. They are accessible in the Administration module under System Setup, Parameter. Changing these parameters shall alter the program behavior. Consult Oracle Customer Support for further clarification if you are unsure of the definition.

Table 3-1 PAR Group — Maintenance

PAR Name	Description
Allow Modify Work Order Date Time	Enable modification of work order date/time. 0 = Do not allow 1 = Allowed to modify work order reported date time
Default Tab for Work Overview	Define the default tab to show 0 = All 1 = Done 2 = Not Started 3 = In Progress
Hide Work Order Request No	Define Work Order Request No to be shown in Work Order Window 0 = To show on window 1 = To hide from window
Maximum picture size allow	Specify the maximum picture size allowed
Print By Task	Enable Printing by Task 0 = No print maintenance task 1 = Print