To create a Budget Transfers record
- Go to your project. Ensure that you are in the User mode.
- Expand the Financial Transactions node and expand the Budget node.
- Select Budget Transfers.
- From the BP log page, click Create.The Create New Budget Transfers form opens. Complete, at minimum, the required fields according to the Upper form table below. You can save the form as a draft at any time. Unifier stores the draft in the Drafts folder.
- In the Line Items section click Add or Grid. The Line Items form opens
- Complete the Line Items form according to the Line Items table below. You must complete all required fields on each line that you entered before you can save the Line Items form.
In this step you are transferring budget from a source cost code to at least one destination cost code, so you need at least two entries. Total Amount of Line Items must equal zero or you will not be able to send the record to the next step.
- Click OK (if using the Line Item form), or Save (if using the grid) to save the form. The Line Items form closes.
If you are using the grid and do not click Save before closing it, you will lose your line item changes.
Unifier automatically calculates the aggregate value of the line items and displays the amount in Total Amount at the bottom of the record.
- In Workflow Actions select the workflow action to take. In this case, your selection is Submit. This action activates Action Details.
- In Action Details, select who should receive the record.
- Click To... The User/Groups picker opens and displays a list of available task recipients.
- Select the user or group who will receive the task on the Review step.
- Click Add.
- Click OK. The User/Group picker closes and the selection appears in the To field. Upon sending, the record will appear in the recipient's Tasks log.
- (Optional) Click Cc... and follow steps a - d. The record will appear in the recipient's Home page under Notifications.
- Click Send to route the record to the Review step. Unifier displays a message stating that the record has been submitted successfully.
Upper Form
General
In this field | Do this |
---|---|
Project Number | This field is auto-populated from the project. |
Record Number | This is a read-only field that Unifier populates when you send the form to the Approval step. |
Project Name |
|
Title* | Enter a name for the record. |
Project Name | This field is auto-populated from the project. |
Amount | This value is auto-calculated from line item entries. |
Creator | This is a read-only field that identifies the person who created the record. The field appears as a link to the creator's contact information. |
Creation Date | This is a read-only field that Unifier populates with the record creation date. |
Due Date | This is a read-only field. Due Date is pre-populated to reflect the number of days you have to finish routing the record. If the record becomes late, Unifier displays the record Title in bold red. |
Status | This read-only field is blank. The status will change when the task is accepted on the next step in the workflow. |
Contract Reference | Select a Contract record. |
Description
In this field | Do this |
---|---|
Description | This is not a required field - Enter a description of the budget change. |
P6 Activity Details
In this field | Do this |
---|---|
P6 Activity | Select the P6 activity you want associated with this budget transfer. |
P6 Planned Start | This value comes from the P6 activity. |
P6 Planned Cost | This value comes from the P6 activity. |
P6 Planned Finish | This value comes from the P6 activity. |
Item Logs
Line Items Tab
In this field | Do this |
---|---|
Cost Code* | This is a required field - Enter the cost code for this line item. You can either enter it directly or use the cost code picker. |
Code Name | This read-only field is auto-populated from the cost code name. |
Short Description* | This is a required field - Enter a brief description of the item specified on the line item |
Description | This is not a required field - Enter a description for the line item. |
Cost Type | This read-only field is auto-populated from the cost code attributes. |
Spend Category | Select the category from the drop-down menu. |
Work Package | Select a Work Package. |
Item Quantity* | This is a required field - Enter the number of items specified on the line item |
Unit of Measure | Select the Unit of Measure for the item specified on the line item line item |
Item Unit Cost* | This is a required field - Enter the price of the item specified on the line item |
Amount | This read-only field is auto-calculated using the formula Item Quantity X Item Unit Cost. |