Scheduling Sequential Synchronizations

A synchronization job sequence is a sequence of synchronizations that are executed consecutively.

To schedule a synchronization job sequence:

  1. In the sidebar, select Synchronizations.
  2. In the Synchronization Name column, select the next or the final synchronization that is to be run in the job sequence.
  3. In the Actions menu, select Edit Schedule....
  4. Select After Synchronization from the Frequency list.
  5. Select the previous synchronization that is to be run in the sequence from the Run After Synchronization list.

    The previous synchronization must finish with a status of Completed, or Completed with Warnings to begin the next synchronization.

    If a synchronization fails to run, all subsequent linked synchronizations will not run in the job sequence.

  6. Repeat the above sequence to set up multiple linked synchronizations in a sequence.
  7. Select Save.
  8. To view a flow chart of the linked synchronizations:
    1. In the Synchronization Name column, select the linked synchronization.
    2. In the Actions menu, select Job Chain Diagram.

      Note: This option is enabled only for a linked synchronization.

  9. To run the job sequence:
    1. On the Synchronizations page, select the Synchronization Name that was last setup in the job sequence.
    2. Select Run.
    3. In the Run Synchronization dialog box, select any of the following options:
      • Run only the selected synchronization or
      • Run the selected synchronization, and the entire linked job sequence
  10. Select Confirm.
  11. On the Monitoring page, review the data transferred by the job sequence.


Legal Notices | Your Privacy Rights
Copyright © 2021

Last Published Thursday, December 16, 2021