TmRouteListOutage

Measurement ID

10073

Measurement Group

Route List

Measurement Type

Simple

Measurement Dimension

Arrayed (by Route List ID)

Time (in seconds) that the Route List was unavailable. This will appear as an aggregate value retrieved from all DA-MPs in a Network Element.Description

Collection Interval

5 min

Peg Condition

The time duration interval starts when one of the following conditions occurs:

1. A new collection interval for the measurement begins and Alarm 22053 - Route List Unavailable (refer to the DSR Alarms and KPIs Reference for details about this alarm) is asserted.
2. Alarm 22053 - Route List Unavailable (refer to the DSR Alarms and KPIs Reference for details about this alarm) is asserted.

The time duration interval stops when one of the following conditions occurs:

1. The current collection interval for the measurement ends and Alarm 22053 - Route List Unavailable (refer to the DSR Alarms and KPIs Reference for details about this alarm) is asserted.
2. Alarm 22053 - Route List Unavailable (refer to the DSR Alarms and KPIs Reference for details about this alarm) is cleared.

When a time duration interval completes, the time measured is added to the total measurement value.

Measurement Scope

Recovery

1. The operation status of the Route List should be verified using the Diameter > Maintenance > Route Lists page.
2. It is recommended to contact My Oracle Support for assistance if needed.