TmTrEnaNotUp

Measurement ID

9410

Measurement Group

Transport Performance

Measurement Type

Simple

Measurement Dimension

Arrayed (per Transport)

Description

The number of seconds during the reporting interval during which the transport was in the Enabled administrative state but was not in APP-UP protocol state. When the transport is Enabled, the desired protocol state is APP-UP. This measurement indicates the amount of time during the reporting interval for which the association was not in the desired protocol state.

Collection Interval

30 min

Peg Condition

Time shall be accumulated for this measurement during the collection interval when all of the following are true:

• the association is in the ENABLED administrative state
• the association is not in the ASP-UP protocol state for M3UA and APP-UP for other Plugins

Measurement Scope

NE, Server

Recovery

1. If all is well, this measurement should have a zero value. A non-zero value indicates that the MP server has attempted to connect to the Peer IP Address at least once and failed to establish the SCTP connection.
2. Otherwise:
   1. Association status can be viewed at Main Menu > Transport Manager > Maintenance > Transport.
   2. Verify that the Adjacent server that represents the far-end of the association is configured with the correct IP address at Main Menu > Transport Manager > Configuration > Adjacent Node.
   3. Verify that the remote port configured at Main Menu > Transport Manager > Configuration > Transport for the association correctly identifies the port that the SG is listening on for SCTP connections.
   4. Verify the IP network connectivity between the MP server and the SG.
   5. If the Adjacent Node must be configured to connect to the MP server's IP address and port, verify that the Adjacent Node configuration matches the association configuration at Main Menu > Transport Manager > Maintenance > Transport.
   6. It is recommended to contact My Oracle Support for assistance if needed.