EvTrCnxFail
- Measurement ID
- 9404
- Measurement Group
- Association Exception
- Measurement Type
- Simple
- Measurement Dimension
- Arrayed (per Transport)
- Description
- The number of times the SCTP connection attempt failed on the association. This includes only unsuccessful attempts to connect to the Signaling Gateway. It does not include failure of established connections.
- Collection Interval
- 30 min
- Peg Condition
- This measurement is incremented by one each time an SCTP connect attempt fails.
- Measurement Scope
- NE, Server
Recovery
- This measurement should have a zero value. A non-zero value indicates that the MP server has attempted to connect to the Signaling Gateway at least once and failed to establish the SCTP connection.You can view Association status from the GUI main menu under .
- Check the event history log from the GUI main menu under , looking for Event ID 19222. Event ID 19222 provides details about the cause of the failure.
- Verify that the Adjacent server that represents the far-end of the association is configured with the correct IP address. You can view the Adjacent servers from the GUI main menu under .
- Verify that the remote port configured for the association correctly identifies the port that the Signaling Gateway is listening on for SCTP connections. You can view the configured port from the GUI main menu under .
- Verify the IP network connectivity between the MP server and the Signaling Gateway.
- If the Signaling Gateway must be configured to connect to the MP server’s IP address and port, verify that the signaling gateway configuration matches the association configuration. You can view association data from the GUI main menu under .
- It is recommended to contact My Oracle Support for assistance if needed.