22007 - Inconsistent Application ID Lists from a
Peer
- Event Type:
- DIAM
- Description:
- The list of Application IDs supported by a peer
during the Diameter Capabilities Exchange procedure on a particular transport
connection is not identical to one of the list of Application IDs received from
the peer over a different available transport connection to that peer.
- Severity:
- Info
- Instance:
- <PeerName>
- HA Score:
- Normal
- Throttle Seconds:
- 10
- OID:
- eagleXgDiameterSupportedAppIdsInconsistentNotify
Recovery:
-
A peer with multiple transport connections has
established a connection and provided a list of supported Application IDs which
does match a previously established connection. This could prevent Request
messages from being routed uniformly over the peer's transport connections
because the decision to route a message containing an Application ID is based
upon the list of Application IDs supported on each transport connection. The
list of Application IDs that the peer supports on each connection can be viewed
as follows:
-
Navigate to
Diameter > Maintenance >
Connections.
-
Locate the relevant Peer Node and check the
supported Application IDs.
-
If Application IDs are not the same for each
connection (but should be) the Application ID for any connection can be
refreshed by:
-
Navigate to Diameter
> Maintenance > Connections.
-
Locate the relevant Connection.
-
Disable the Connection.
-
Enable the Connection.
-
If the problem persists, it is recommended to
contact
unresolvable-reference.htm#GUID-DD0927BD-FD0B-4CEB-86E9-98A33C12D4E0.