Using an Import File to insert DSR Configuration Data

Use the following procedure to insert into the system new configuration data entries from the records in a DSR Bulk Import CSV file.

1. Select Diameter Common > Import.

   The Diameter > Common > Import page appears. The page lists all of the .csv files from the Status & Manage > Files File Management area.

2. Select the File Name for the file to be used to insert the configuration data.
3. Specify whether the Import operation should stop processing on the first error that occurs, or should continue processing if errors occur during the Import operation.
   • To continue processing when errors occur, click the Abort On First Error check box so that the box is empty (the default).
   • To stop processing on the first error, click the Abort On First Error check box so that a checkmark appears in the check box.
4. Click Insert From CSV.

   A popup window appears to confirm the file to use for the Insert From CSV operation.

5. On the popup window, do one of the following actions:
   • OK to perform the Import Insert From CSV operation.

     An indication is displayed that the operation is in progress.

   • Cancel to cancel the Insert From CSV operation and return to the Diameter Common > Import page.

6. To view the progress of the Import operation, you can:
   • Select the Tasks icon near the top left of the Diameter > Configuration > Import page.
   • Select Status & Manage > Tasks > Active Tasks to open the Status & Manage > Tasks > Active Tasks (Filtered) page.
7. To view the log file from the Import operation, and the Failures.csv file if one was created, click File Management to open the Status & Manage > Files (Filtered) page.