Adding an SNMP manager

Use this procedure to add an SNMP Manager:

1. Select Administration > Remote Servers > SNMP Trapping.
   The SNMP Trapping page opens.
2. Update Enabled Versions as appropriate.
   For more information about Enabled Versions, or any field on this page, see SNMP administration elements.
3. Select an empty Manager field, and populate it with the hostname or IP address of the SNMP manager.
4. (Optional) Enable traps from individual servers.
5. (Optional) For SNMPv2c managers, change the SNMPV2c Read-Only Community Name.
6. (Optional) For SNMPv2c managers, change the SNMPV2c Read-Write Community Name.
7. (Optional) For SNMPv3 managers, select an SNMPv3 Security Level, and change:
   • SNMPv3 Engine ID
   • SNMPv3 Authentication Type
   • SNMPv3 Privacy Type
8. For SNMPv3 managers with user authentication enabled, configure SNMPv3 Username.
9. For SNMPv3 managers with privacy enabled, configure SNMPv3 Password.
10. Click OK or Apply to submit the information.

The new manager and related settings are saved and activated.