Adding a Key Range

Use this procedure to configure a key range hosted by a User Data Repository system in the remote pool network.

You can only perform this task when logged into the Active Primary NOAMP. Note that you must have permission to edit this page. Permission groups are defined on the Main Menu > Administration > Access Control > Groups page.

1. Select UDR > Configuration > Pool Spanning > UDR Key Range.
   The UDR Key Range page appears.
2. Click Insert. (Insert is not active if you don't have permission to add a UDR key range.)
   The UDR Key Range [Insert] page appears. For a detailed explanation about the options and valid input for the fields on this page, see UDR Key Range Elements.
3. Select the UDR Name field to be associated with the new key range.
4. Select the Key Type to be associated with this key range.
5. Enter the Start Range and End Range values for the key range.
6. Perform one of the following:
   • Click OK to save the key range and return to the UDR Key Range page.
   • Click Cancel to return to the UDR Key Range page without saving the changes.
   If OK is clicked and any of the following exist, an error message appears:

   • Any required field is empty; no value was entered or selected (All fields on this page are required.)
   • The entry in any field is not valid (wrong data type or out of the valid range)
   • The key range values for this User Data Repository system already exists