Flashing eLYNX card with Latest Software

The eLYNX card comes configured with the factory version of eLYNX software. The flashing procedure is required to load the latest software on to the eLYNX Card. Follow these steps to flash the eLYNX card:

1. On the vSTP-MP attached to the eLYNX card, execute following command:

   $ sudo elynx_test

2. From the options menu, select following option:

   25. Update flash

3. After selecting option 25, input card number 0 and press “enter” button:

   Enter the Option: 25

   Enter the Card Number: 0

4. The flashing procedure shall begin now and will display following ouput:

   Downloading BOOT.bin
   ================================================
   BOOT.bin downloaded successfully
   flash status : 2
   ================================================
   BOOT.bin copied to card memory
   Memory flash update is in process ...
   
   flash update is in progress
   

5. After the flashing is complete, the program will return to original menu and following output will be visible above the menu list:

   Update flash completed for card: 0

6. Select Input option 26 to exit the program.
7. Once all eLYNX cards on given host machine are flashed. Reboot the host machine to load the latest software on the eLYNX card.