1. Diameter Signaling Router Diameter Custom Applications Feature Activation Guide
  2. Pre-Deactivation Procedures
  3. Pre-Feature Deactivation Perform Health Check

Pre-Feature Deactivation Perform Health Check

This procedure is used to determine the health and status of the DSR network and servers.

Log in to the NOAM VIP GUI, establish a GUI session on the NOAM server by using the VIP address of the NOAM server.

  1. Open the web browser and enter the URL, http://<Primary_NOAM_VIP_IP_Address>
  2. Log in as the guiadmin user.

    Figure 15-1 Oracle System Log in


    Oracle System Log in

  3. Verify the Server Status. Expand Status & Manage click on Server

    Figure 15-2 Status and Manage


    Status and Manage

  4. Verify all Server Status is Normal (Norm) for, Alarm (Alm), Database (DB), Reporting Status, and Processes (Proc).

    Figure 15-3 Alarms


    Alarms

    Do not proceed to feature activation if any of the above states are not Norm. If any of these are not Norm, corrective action should be taken to restore the non-Norm status to Norm before proceeding with the feature activation.

    If the Alarm (Alm) status is not Norm but only Minor alarms are present, it is acceptable to proceed with the feature activation. If there are Major or Critical alarms present, these alarms should be analyzed before proceeding with the feature activation. The activation may be able to proceed in the presence of certain Major or Critical alarms.

  5. In the NOAM VIP GUI, verify the server configuration. Expand the option Configuration and click Server Groups.

    Figure 15-4 Server Groups


    Server Groups

    Verify the configuration data is correct for your network.

  6. In the NOAM VIP GUI, log the current alarms. Expand the Alarms & Events option and click View Active

    Figure 15-5 View Active Alarms


    View Active Alarms

  7. Click Report

    Figure 15-6 Report


    Report

  8. Verify if the configuration data is correct for your network. Save or Print this report to keep copies for future reference.

    Figure 15-7 Save or Print


    Save or Print

  9. In the NOAM VIP GUI, log the alarm history. Expand Alarms & Events option and click View History.
  10. Click Report

    Figure 15-8 Report


    Report

  11. Verify if the configuration data is correct for your network. Save or Print this report to keep copies for future reference.

    Figure 15-9 Save or Print


    Save or Print

    If this procedure fails, contact My Oracle Support (MOS) for assistance.