1. Measurement Reference Guide
  2. Measurements
  3. SCEF measurements
  4. SCEF NIDD Exception Measurement Group
  5. ExNiddUlApnRateExceeded

3.76.8.21 ExNiddUlApnRateExceeded

Measurement ID
13068
Measurement Group
SCEF NIDD Exception
Measurement Type
Simple
Measurement Dimension
Arrayed on APN
Description
The number of NIDD Uplink Data packets that were rejected because the APN Uplink Rate limit was reached in the given collection interval.
Collection Interval
30 min
Peg Condition
This measurement is incremented each time an NIDD Uplink Data Delivery packet received in Diameter ODR message is rejected by SCEF application as the configured Uplink APN Rate limit was reached.
Measurement Scope
Network Element, Place Association

Recovery

  1. If the pegging of this measurement is unexpectedly high, the Uplink APN Rate Control configuration may be reviewed.
    The Uplink APN Rate Control parameters are conveyed to the MME/SGSN in the Extended Protocol Configuration Options. Hence, the MME/SGSN is expected to not send Uplink messages at a rate that it gets discarded at SCEF.