1. Measurement Reference Guide
  2. Measurements
  3. Diameter Signaling Router (DSR) Application Performance measurements
  4. RxPcaMsgRatePeak

3.23.23 RxPcaMsgRatePeak

Measurement ID
11362
Measurement Group
DSR Application Performance
Measurement Type
Max
Measurement Dimension
Single
Description
Peak Policy and Charging DSR Application's Ingress Message Rate measured during the collection interval
Collection Interval
5 min
Peg Condition
When the maximum of all DSR Application Ingress Message Rate samples is taken during the collection interval.
Measurement Scope
Server Group

Recovery

  1. Display and monitor the DSR Application message rate by selecting Diameter, and then Maintenance, and then Applications. Verify that the message rate is set as expected.
  2. Application Routing might be mis-configured and is sending too much traffic to the DSR Application. Verify the configuration by selecting Diameter, and then Configuration, and then Application Routing Rules.
  3. There might be an insufficient number of MPs configured to handle the network load. Monitor the traffic rate of each MP by selecting Diameter, and then Status & Manage, and then KPIs.
    If MPs are in a congestion state, then the offered load to the server site is exceeding its capacity.
  4. If the problem persists, it is recommended to contact unresolvable-reference.html#GUID-F069C6FD-5BA3-4F31-AE9E-A187D5B5F729.