1. Measurement Reference Guide
  2. Measurements
  3. Diameter Signaling Router (DSR) Application Performance measurements
  4. RxRbarRequestMsgQueueAvg

3.23.26 RxRbarRequestMsgQueueAvg

Measurement ID
10301
Measurement Group
DSR Application Performance
Measurement Type
Average
Measurement Dimension
Single
Description
Average Request Message Queue utilization (0-100%) measured during the collection interval
Collection Interval
5 min
Peg Condition
When the average of all Request Message Queue utilization samples is taken during the collection interval.
Measurement Scope
Server Group

Recovery

  1. Display and monitor the DSR Application status by selecting Diameter, and then Maintenance, and then Applications. Verify that the Operational Reason, which indicates congestion level, is set as expected.
    The DSR Application's Request Message Queue Utilization is approaching its maximum capacity. This alarm should not normally occur when no other congestion alarms are asserted.
  2. Application Routing might be mis-configured and is sending too much traffic to the DSR Application. Verify the configuration by selecting Diameter, and then Configuration, and then Application Routing Rules.
  3. If no additional congestion alarms are asserted, the DSR Application Task might be experiencing a problem that is preventing it from processing message from its Request Message Queue. Examine the Alarm log in Alarms & Events
  4. If the problem persists, it is recommended to contact unresolvable-reference.html#GUID-F069C6FD-5BA3-4F31-AE9E-A187D5B5F729.