1. User Guide
  2. Configuration
  3. DRMP configuration
  4. Adding DRMP attributes

3.2.2 Adding DRMP attributes

You can only perform this task for the given SOAM Server Group.

  1. Select SDS, and then Configuration, and then DRMP.
  2. Click Insert.
  3. Select a SOAM server group name in the Server Group Name list.
  4. Set the 16 Priority Admin State.
  5. Set the NGN-PS Admin State.
  6. Set the Minimum Inviolable Priority.
    • Select 3 when 16 Priority Admin State is Disabled (irrespective of NGN-PS Admin State). This is the default.
    • Select 15 when 16 Priority and NGN-PS Admin State are Enabled.
    • Select 16 when Priority Admin State is Enabled but NGN-PS Admin State is Disabled.
  7. Set the Minimum Response Priority. Select 0 or 2.
  8. Set the Discard Priority. Select Priority Only, Priority Within Color, Color Within Priority.
  9. Perform one of the following:
    • Click OK to save the connection and return to the SDS configuration DRMP page.
    • Click Apply to save the connection and remain on this page.
    • Click Cancel to return to the DRMP page without saving the changes.
    If field validations succeed, the connection is saved. If OK or Apply is clicked and any of the following conditions exist, an error message appears:
    • Any required field is empty; no value was entered or selected
    • The entry in any field is not valid (wrong data type or out of the valid range)