The image is a picture of the rear of the storage server. On the far left are two power supplies. Each power supply has a fan on the left and a plug port on the right. The power supplies are labeled PS0 (bottom) and PS1 (top). The LEDs for each power supply are Fault-Service Required LED (top) and AC OK LED (bottom).
To the right of the power supplies are 6 PCIe3 slots, 1 through 6, which are all empty. To the right of these PCIe slots are the network connections. The top network plug is the Serial management (SER MGT) RJ-45 serial port. Below this and slightly to the left are the Oracle Integrated Lights Out Manager (ILOM) service processor (NET MGT) port. Below this is the Network (NET 0) port. To the immediate right of these network ports is the USB 3.0 connector. To the right of the USB connector are the system status LEDs: Locate Button/LED, Fault-Service Required, and System OK. To the right of the SER MGT port are the remaining PCIe slots, 7 through 11. In the PCIe slot 7 there is a network card with 2 optical ports, labeled Port 1 and Port 2. The rest of the PCIe slots are empty in this image.