1. SDS BareMetal to Cloud Migration Guide
  2. Migration
  3. Reuse of the Existing Hardware and Existing IP Addresses
  4. Accessing XMI IP of SDS

4.1.3 Accessing XMI IP of SDS

Perform the following procedure to access and configure XMI IP of new vSDS 9.0.1 VM.
  1. Install OL8 and KVM/OpenStack on the shutdown BM server.
  2. Create SDS 9.0.1 VM.
  3. Assign XMI IP to new vSDS 9.0.1 VM.
    • To configure netmask and XMI IP address values, run the following command:
      sudo /usr/TKLC/plat/bin/netAdm set --onboot=yes --netmask=<netmask> --device=eth0 --address=<IP address>
      where, <netmask> indicates vSDS 9.0.1

      <IP Address> indicates the IP address of vSDS 9.0.1

    Note:

    For further information on accessing XMI IP, refer to SDS Installation on OL8 and KVM and Software Installation Procedure sections in SDS Cloud Installation Guide.