1. Virtual Signaling Transfer Point User Guide
  2. GUI Configurations
  3. Configuration
  4. IDPR Options

5.1.34 IDPR Options

The Initial Detection Point Relay (IDPR) Options are those configuration values that govern the overall IDPR SMS. There is a single instance of this resource, which contains each of the individual options that can be retrieved and set.

The IDPR Options can only be updated and cannot be created or deleted.

Select the VSTP, and then Configuration, and then IDPR Options page. The page displays the elements on the IDPR Options View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-34 IDPR Options Elements

Element Description Data Input Notes
Cdcnp Specifies whether the CutAndPaste parameter is included in the CONNECT message generated by the INPRTG Service Action based on the CdPN RTDB lookup. Default='Off'

Range= On,Off
Cddnnotfndrsp

The system response for an IDP message processed by the IDPR/TTR service when the Called Party Number (CdPN) is not found in the RTDB.

Default='Release'

Range= Connect, Continue, Relay, Release

Cddra

The destination routing address (DRA) used in the CONNECT message generated by the INPRTG Service Action based on the CdPN RTDB lookup.

Default='Rndn'

Range=Rn, Rndn, Grn, Rnasd, Asdrn, Rngrn, Grnrn, Ccrndn, Rnasddn, Asdrndn, Ccrnasddn, Ccasdrndn, Asdrnccdn, Rnasdccdn, Rngrndn, Grnrndn, Ccrngrndn, Ccgrnrndn, Grnrnccdn, Rngrnccdn, Grndn, Ccgrndn
Cddranai

The DRA nature of address indicator used in the CONNECT response generated by the INPRTG Service Action based on the CdPN RTDB lookup.

Default='Natl'

Range='Sub', 'Unknown', 'Natl', 'Intl', 'Ntwk'
Cddranp

The DRA numbering plan used in the CONNECT response generated by the INPRTG Service Action based on the CdPN RTDB lookup.

Default='E164'

Range='E164', 'X121', 'F69'
Cdnoentityrsp

The system response for an IDP message processed by the IDPR/TTR service when neither the RN nor SP entity is found in the CdPN RTDB.

Default='Continue'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cdrelcause

The cause parameter value for the RELEASECALL message generated by the INPRTG Service Action based on the CdPN RTDB lookup.

Default=31

Range= 1-127
Cdrnrsp

The system response for an IDP message processed by the IDPR/TTR service when the CdPN is associated with an RN entity.

Default='Connect'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cdsprsp

The system response for an IDP message processed by the IDPR/TTR service when the CdPN is associated with an SP entity.

Default='Relay'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cgcnp

Specifies whether the CutAndPaste parameter is included in the CONNECT message generated by the INPRTG Service Action based on the CgPN RTDB lookup.

Default='Off'

Range= 'On','Off'
Cgdnnotfndrsp

The system response for an IDP message processed by the IDPR/TTR service when the Calling Party Number (CgPN) is not found in the RTDB.

Default='Release'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cgdra

The DRA used in the CONNECT response generated by the INPRTG Service Action based on the CGPN RTDB lookup.

Default='Rndn'

Range='Rn', 'Rndn', 'Grn', 'Rnasd', 'Asdrn', 'Rngrn', 'Grnrn', 'Ccrndn', 'Rnasddn', 'Asdrndn', 'Ccrnasddn', 'Ccasdrndn', 'Asdrnccdn', 'Rnasdccdn', 'Rngrndn', 'Grnrndn', 'Ccrngrndn', 'Ccgrnrndn', 'Grnrnccdn', 'Rngrnccdn', 'Grndn', 'Ccgrndn'
Cgdranai

The NAI option used in the CONNECT response generated by the INPRTG Service Action based on the CgPN lookup.

Default='Natl'

Range='Sub', 'Unknown', 'Natl', 'Intl', 'Ntwk'
Cgdranp

The DRA NP used in the CONNECT response generated by the INPRTG Service Action based on the CgPN lookup.

Default='E164'

Range='E164', 'X121', 'F69'
Cgnoentityrsp

The system response for an IDP message processed by the IDPR/TTR service when neither the RN nor SP entity is found in the CgPN RTDB.

Default='Continue'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cgnptype

CgPN database lookup type. The entity type that is considered a success when used for RTDB lookup.

Default='Rnsp'

Range= 'Sp', 'Rn', 'Rnsp', 'Anymatch', 'Always', 'Rnspdn'
Cgpaccck

CgPA country code check. This parameter specifies whether a DEFCC check is performed on the incoming CgPA.

Default='Nonintl'

Range= 'Nonintl', 'Off', 'Always'
Cgpnskrtg

This parameter specifies whether SK routing occurs if IDP A-Party routing fails.

Default='No'

Range= 'No', 'Yes'
Cgrelcause

The cause parameter value in the RELEASECALL message generated by an INPRTG Service Action based on the CgPN RTDB lookup.

Default=31

Range= 1-127
Cgrnrsp

The system response for an IDP message processed by the IDPR/TTR service when the CgPN is associated with an RN entity.

Default='Connect'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Cgsnai

Calling party number nature of address indicator. The CgPN NAI that is used during number conditioning.

Default='Incoming'

Range='Incoming', 'Unkn', 'Natl', 'Intl'
Cgsprsp

The system response for an IDP message processed by the IDPR/TTR service when the CgPN is associated with an RN entity.

Default='Connect'

Range= 'Connect', 'Continue', 'Relay', 'Release'
Dfltrn

Default routing number. The default RN used when a value of sp or rnsp is specified for the nptype parameter, and the CdPN RTDB lookup returns entity type SP.

Default='None'

Range= a-f, A-F, 0-9, 'None', Maximum Length=15
Dlma

Delimiter A. The first delimiter used to format the outgoing TCAP DN.

Default='None'

Range= a-f, A-F, 0-9, 'None', Maximum Length = 16
Dlmb

Delimiter B. The second delimiter used to format the outgoing TCAP DN.

[Default='None', Range= a-f, A-F, 0-9, 'None', Maximum Length = 16]
Dlmc

Delimiter C. The third delimiter used to format the outgoing TCAP DN.

[Default='None', Range= a-f, A-F, 0-9, 'None', Maximum Length = 16]
Drafrmt

DRA digit format. The format of the DRA digits.

[Default='Grn', Range= 'Grn', 'Grndn', 'Dngrn', 'Ccgrndn', 'Grnccdn']
Dranai

DRA nature of address indicator. The DRA NAI that is used during number conditioning.

[Default=3, Range= 1-127]
Nai2ton

NAI to TON Mapping. NAI and TON values are separated by '-'. Multiple mappings can be provided separated by ','.

[Range= Valid values for NAI lies between 1 to 127. Valid values for TON lies between 0 and 7.]
Nptype

Entity type for CdPN RTDB lookup. The entity type that is considered a success when used for RTDB lookup.

[Default='Rnsp', Range= 'Sp', 'Rn', 'Rnsp', 'Anymatch', 'Always', 'Rnspdn']
Rnspfill

This parameter specifies whether the RN and SP entities are set to the value of the RN or SP digits from the RTDB when certain conditions are met.

[Default='Off', Range= 'On','Off']
Spfill

This parameter specifies whether the SP entity type is populated if the value specified for the dfltrn or grn parameter is used for NPP processing.

[Default='Off', Range= 'On','Off']
Snai

CdPN nature of address indicator. The CdPN NAI used during number conditioning.

[Default='Incoming', Range='Incoming', 'Unkn', 'Natl', 'Intl']
Ton2nai

TON to NAI Mapping. TON and NAI values are separated by '-'. Multiple mappings can be provided separated by ','.

[Range= Valid value for TON lies between 0 and 7. Valid values for NAI lies between 1 to 127.]

You can perform edit task on VSTP>Configuration>IDPR Options page.

Editing an IDPR Option

Use this procedure to change the field values for a selected IDPR Option.:
  1. Select the IDPR Option row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel