5.1.37 M3UA Config

A M3ua Config is an entity to configure all the m3ua timers.

Select the VSTP, and then Configuration, and then M3UA Config page. The page displays the elements on the M3UA Config View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-37 M3UA Config Elements

Element	Description	Data Input Notes
Name	Name for this M3ua Config, which must be unique within the VSTP site. This is a mandatory field.	Valid names are strings between one and 32 characters, inclusive. Valid characters are alphanumeric and underscore. The name must contain at least one alpha and must not start with a digit.
Excessive acknowledgement delay time	Excessive acknowledgement delay timer. The amount of time (in milliseconds) for which M2PA waits between transmission of a user data message and receipt of an acknowledgement for that message from the peer. If this timer expires, the link is taken out of service.	Typical value is 500. Minimum 500, Maximum: 10000 Default: 2000

You can perform add, edit, or delete tasks on VSTPConfigurationM3UA Config page.

Adding a M3UA Config

Perform the following steps to configure a new M3UA Config:

1. Click Insert.

   Note:

   The new M3UA Config must have a name that is unique across all M3UA Config at the SOAM. In addition, the M3UA Config's IP Port combination must also be unique across all M3UA Config configured at the SOAM.
2. Enter the applicable values.
3. Click OK, Apply, or Cancel

Editing a M3UA Config

Use this procedure to change the field values for a selected M3UA Config. (The M3UA Config Name field cannot be changed.):

1. Select the M3UA Config row to be edited.
2. Click Edit
3. Enter the updated values.
4. Click OK, Apply, or Cancel

Deleting a M3UA Config

Use the following procedure to delete a M3UA Config.

Note:

You cannot delete a M3UA Config if it is part of the configuration of one or more Linksets.

1. Select the M3UA Config to be deleted.
2. Click Delete.
3. Click OK or Cancel.