1. Virtual Signaling Transfer Point User Guide
  2. GUI Configurations
  3. Configuration
  4. NPP Action Sets

5.1.28 NPP Action Sets

A Numbering Plan Processor (NPP) Action Set is a collection of Conditioning Actions (CAs), Service Actions (SAs), and Formatting Actions (FAs).

Select the VSTP, and then Configuration, and then NPP Action Sets page. The page displays the elements on the NPP Action Sets View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-28 NPP Action Sets Elements

Element Description Data Input Notes
NPP Action Set Name Name for this NPP Action Set.

This is a mandatory field.

Valid names are strings between one and 10 characters, inclusive. Valid characters are alphanumeric and underscore. The name must contain at least one alpha and must not start with a digit.
CA List Conditioning Action list. This CA list can be applied to an incoming digit string. Up to 12 CAs can be specified in the list. The CAs are processed in the order they are specified in the list. Range = "Ac1", "Ac2", "Ac3", "Ac4", "Ac5", "Ac6", "Ac7", "Ac8","Accgpn", "Accgpn1", "Accgpn2","Accgpn3","Accgpn4","Accgpn5","Accgpn6","Accgpn7","Accgpn8", "Acdef", "Aclac", "Cc1", "Cc2", "Cc3", "Ccdef","Cccgpn","Dn1","Dn2","Dn3","Dn4","Dn5","Dn6","Dn7","Dn8","Dn9","Dn10","Dn11","Dn12","Dn13","Dn14","Dn15","Dnx","Fpfx","Ign1","Ign2","Ign3","Ign4","Ign5","Ign6","Ign7","Ign8","Ign9","Ign10","Pfxa1","Pfxa2","Pfxa3","Pfxa4","Pfxa5","Pfxa6","Pfxa7","Pfxa8","Pfxb1","Pfxb2","Pfxb3","Pfxb4","Pfxb5","Pfxb6","Pfxb7","Pfxb8","Pfxc1","Pfxc2","Pfxc3","Pfxc4","Pfxc5","Pfxc6","Pfxc7","Pfxc8","Pfxd1","Pfxd2","Pfxd3","Pfxd4","Pfxd5","Pfxd6","Pfxd7","Pfxd8","Pfxe1","Pfxe2","Pfxe3","Pfxe4","Pfxe5","Pfxe6","Pfxe7","Pfxe8","Pfxf1","Pfxf2","Pfxf3","Pfxf4","Pfxf5","Pfxf6","Pfxf7","Pfxf8","Sn1","Sn2","Sn3","Sn4","Sn5","Sn6","Sn7","Sn8","Sn9","Sn10","Sn11","Sn12","Sn13","Sn14","Sn15","Snx","Znx"
SA List Service Action list. This SA list can be applied to an incoming digit string. Up to 8 SAs can be specified in the list. The SAs must be specified in high-to-low precedence order in the list, and cannot be duplicated in the list. Range = "Asdlkup", "Blklstqry", "Blklstrly", "Blnfndrls", "Blrls", "Cdial", "Ccncchk", "Cdpnnp", "Cgpnasdrqd", "Cgpngrnrqd", "Cgpnnp", "Cgpnrtg", "Cgpnsvcrqd", "Crp", "Fpfxrls", "Fraudchk", "Fwdscs", "Grnlkup", "Inprtg", "Lacck", "Migrate", "Nocgpnrls", "Npnrls", "Nprelay", "Nprls", "Nscgpn", "Nscdpn", "Pprelay", "Rtdbtrn", "Rtdbtsp", "Rtdbtrnsp", "Selscr", "Skgtartg", "Snscgpn" , "Tifgnbl", "Tiflsbl", "Tifrdnbl"
FA List Formatting Action list. This FA list can be applied to the outgoing digit string. Up to 12 FAs can be specified in the list. The FAs are processed in the order they are specified in the list and cannot be duplicated. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
Fane Formatting Action list type Fane. Formatting Action List when the SP and RN entities are not associated with the DN in the RTDB. [Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn" ]
Fanf Formatting Action list type Fanf. Formatting Action when the DN is not present in the RTDB. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
Farn Formatting Action list type Farn. Formatting Action List when the RN network entity is associated with the DN in the RTDB. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
Fasp Formatting Action list type Fasp. Formatting Action List when the SP network entity is associated with the DN in the RTDB. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
Fascrcd Formatting Action list type Fascrcd. Formatting Action List to format ISUP CdPN digits when CdPN is Screened and SA(X)VAL is none. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
Fascrcg Formatting Action list type Fascrcg. Formatting Action List to format ISUP CgPN digits when CdPN is Screened and SA(X)VAL is none. Range = "Ac", "Asd", "Asdother", "Cc", "Dlma", "Dlmb", "Dlmc", "Dlmd", "Dlme", "Dlmf", "Dlmg", "Dlmh", "Dlmi", "Dlmj", "Dlmk", "Dlml", "Dlmm", "Dlmn", "Dlmo", "Dlmp", "Dn", "Fpfx", "Grn", "Grnother", "Orig", "Pfxa", "Pfxb", "Pfxc", "Pfxd", "Pfxe", "Pfxf", "Rn", "Rnospodn", "Rnosposn", "Rnospozn", "Sn", "Sp", "Srfimsi", "Vmid", "Zn"
SA 1 Numerical Value Service Action 1 numerical values list. A comma-separated numerical values list that can be used with the first SA. Two values can be provided at maximum Range = 0-65534
SA 2 Numerical Value Service Action 2 numerical values list. A comma-separated numerical values list that can be used with the second SA. Two values can be provided at maximum[ Range = 0-65534
SA 3 Numerical Value Service Action 3 numerical values list. A comma-separated numerical values list that can be used with the third SA. Two values can be provided at maximum Range = 0-65534
SA 4 Numerical Value Service Action 4 numerical values list. A comma-separated numerical values list that can be used with the fourth SA. Two values can be provided at maximum Range = 0-65534
SA 5 Numerical Value Service Action 5 numerical values list. A comma-separated numerical values list that can be used with the fifth SA. Two values can be provided at maximum Range = 0-65534
SA 6 Numerical Value Service Action 6 numerical values list. A comma-separated numerical values list that can be used with the sixth SA. Range = 0-65534
SA 7 Numerical Value Service Action 7 numerical values list. A comma-separated numerical values list that can be used with the seventh SA. Range = 0-65534
SA 8 Numerical Value Service Action 8 numerical values list. A comma-separated numerical values list that can be used with the eighth SA. Two values can be provided at maximum. Range = 0-65534
SA 1 Digit String

Service Action 1 digit string. This parameter specifies a digit string that can be used with the first SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 2 Digit String

Service Action 2 digit string. This parameter specifies a digit string that can be used with the second SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 3 Digit String

Service Action 3 digit string. This parameter specifies a digit string that can be used with the third SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 4 Digit String

Service Action 4 digit string. This parameter specifies a digit string that can be used with the fourth SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 5 Digit String

Service Action 5 digit string. This parameter specifies a digit string that can be used with the fifth SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 6 Digit String

Service Action 6 digit string. This parameter specifies a digit string that can be used with the sixth SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 7 Digit String

Service Action 7 digit string. This parameter specifies a digit string that can be used with the seventh SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
SA 8 Digit String

Service Action 8 digit string. This parameter specifies a digit string that can be used with the eighth SA.

Range = a-f,A-F, 0-9 Maximum Length = 8
OFNAI

Outgoing filter nature of address indicator. The filter nature of address indicator (FNAI) class of the outgoing digit string.

Range = 'Intl', 'Natl', 'Nai1', 'Nai2', 'Nai3', 'Unkn', 'Inc'

You can perform add, edit, or delete tasks on VSTP>Configuration>NPP Action Sets page.

Adding a NPP Action Set

Perform the following steps to configure a new NPP Action Set:

  1. Click Insert.

    Note:

    The set name must be unique across all NPP Action Sets at the SOAM.
  2. Enter the applicable values.
  3. Click OK, Apply, or Cancel

Editing a NPP Action Set

Use this procedure to change the field values for a selected NPP Action Set. (The NPP Action Set Name field cannot be changed.):
  1. Select the NPP Action Set row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel

Deleting a NPP Action Set

Use the following procedure to delete a NPP Action Set.

Note:

NPP Action Set cannot be removed if it is being used by NPP Service Rule Set.
  1. Select the NPP Action Set to be deleted.
  2. Click Delete.
  3. Click OK or Cancel.