1. Virtual Signaling Transfer Point User Guide
  2. GUI Configurations
  3. Configuration
  4. SCCP Mrn Sets

5.1.18 SCCP Mrn Sets

A Mated Relay Node (MRN) Set is a logical grouping of Remote Signaling Points (/vstp/remotesignalingpoints) referred as a load sharing group. The Default MRN Set (the MRN Set with mrnSetId equal to 0) can have multiple load sharing groups. All other MRN Sets can have only one load sharing group. A load sharing group can have at most 32 RSPs.

Select the VSTP, and then Configuration, and then SCCP Mrn Sets page. The page displays the elements on the SCCP Mrn Sets View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-18 SCCP Mrn Sets Elements

Element Description Data Input Notes
MrnSet Id Id of this MRN Set. mrnSetId can be any integer in the range. It must be unique across MRN sets.

This is a mandatory field.

Range= Maximum: 1500 Minimum: 1
Relative Cost Defines the relative cost of the route for the RSP (/vstp/remotesignalingpoints) of this MRN Set.

This is a mandatory field.

Maximum: 99 Minimum: 0
RSP Name Defines the Remote Signaling Point name (/vstp/remotesignalingpoints) associated with this MRN Set.

This is a mandatory field.

Threshold Defines the in-service threshold for all RSP (/vstp/remotesignalingpoints) in this MRN Set having the same relativeCost. Maximum: 100 Minimum: 1
Weight Defines the weight assigned to the RSP (/vstp/remotesignalingpoints) of this MRN Set. Maximum: 99 Minimum: 1

You can perform add, edit, or delete tasks on VSTP>Configuration>SCCP Mrn Sets page.

Adding a SCCP Mrn Set

Perform the following steps to configure a new SCCP Mrn Set:

  1. Click Insert.

    Note:

    The combination of mrnSetId, groupId and rspName must be unique across all MRN Set entries at the SOAM.
  2. Enter the applicable values.
  3. Click OK, Apply, or Cancel

Editing a SCCP Mrn Set

Use this procedure to change the field values for a selected SCCP Mrn Set. (The SCCP Mrn Set Name field cannot be changed.):
  1. Select the SCCP Mrn Set row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel

Deleting a SCCP Mrn Set

Use the following procedure to delete a SCCP Mrn Set.

Note:

If only one RSP is associated with the MRN Set, it is deleted and the groupId and mrnSetId assigned to this MRN Set becomes available to configure a new MRN Set.
  1. Select the SCCP Mrn Set to be deleted.
  2. Click Delete.
  3. Click OK or Cancel.