3.1 Activate MDS Feature

1. Log out of any active NOAM or SOAM GUI sessions.
2. Establish the SSH session to the NOAM VIP and login as admusr.
3. Navigate to the feature activation directory by running the following command:

   cd /usr/TKLC/dsr/prod/maint/loaders

4. Run the feature activation script using the following command:

   ./featureActivateDeactivate

   1. Enter 1 at Enter your choice to Activate.

      Figure 3-1 Activating the feature

      
      

      

      
      
   2. Enter 7 at Enter your choice to Activate.

      Figure 3-2 Selecting the MDS feature

      
      

      

      
      
   3. Enter your choice to select the active SO server to activate the feature.

      Figure 3-3 Activating SO server

      
      

      

      
      

      Refer to Sample output of Activation on Active NOAM for output example.
5. Establish a GUI session on the active NOAM server by using IP address of the NOAM server.
   Open the web browser and enter the URL https://<Active_NOAM_IP_Address> and log in as the guiadmin user.
6. Locate and verify the Measurements Streaming folder from the Main Menu and subfolders under Measurements Streaming.
7. Repeat the steps 5, 6 for Standby NOAM, Active and Standby SOAM (SOAM a site where feature is activated).

   Note:

   Measurement Streaming tab or Measurement Streaming folder takes 5-10 minutes after activation to be visible on the GUI.