3.1.1.8 Network Insert Fields

The following table describes the Network Insert Fields.

Table 3-2 Networks Insert Field

Field	Description	Data Input Notes
Network Name	The name of the network.	Must be unique. Format: String Range: 1-31 alphanumeric characters. Must start with a letter. No special characters are allowed. Defaut: n/a A value is required.
Network Type	The type of network in the context of the application.	Format: List Range: OAM or Signaling Default: OAM
VLAN ID	The VLAN ID of the Network.	Format: Numeric Range: 1-4094 A value is required.
Network Address	The network address of the Network.	Format: Valid network address Range: Dotted decimal (IPv4) or colon hex (IPv6) Default: n/a A value is required.
Netmask	Subnetting to apply to servers within the Network.	Format: Valid network netmask Range: Prefix length (IPv4 or IPv6) or dotted quad decimal (IPv4) Default: n/a A value is required.
Router IP	The IP address of a router on this network. Note: If this is a default network, this is used as the gateway address of the default route on servers with interfaces on this network. If customer router monitoring is enabled, this address is the one monitored.	Format: Valid IP address Range: Dotted decimal (IPv4) or colon hex (IPv6) Default: n/a Note: A value is not required. Networks without a router IP cannot be used as the default network. The default network selection defaults to No.
Default Network	Whether the network is the default gateway.	Format: Option Range: Yes or No
Routed	Whether the network is routed outside its network element. Note: The network is automatically assigned to a network element when a server in a network element has an IP from the network assigned. If it is not assigned to a network element, it is assumed to be possibly present in all network Field.	Format: Option Range: Yes or No Note: Select No to allow the same IMI network/IPs to be used at multiple Signaling sites.