5.1.47 CAT2 IMSI

A CAT2 IMSI is an entity which are used to perform Category 2 securiry check for IMSI based. It will be used for IR21 upload feature.

Select the VSTP, and then Configuration, and then CAT2 IMSIs page. The page displays the elements on the CAT2 IMSIs View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-47 CAT2 IMSIs Elements

Element	Description	Data Input Notes
mccmnc	E212 mobile country code/mobile network code.
TA Digit Code	Name of TA Digit code.	Valid names are strings between one and 5 characters, inclusive. Valid characters are alphanumeric. The name must contain at least one alpha and must not start with a digit.
Sender TA Digit Code	Name of Sender TA Digit code.	Valid names are strings between one and 5 characters, inclusive. Valid characters are alphanumeric. The name must contain at least one alpha and must not start with a digit.
Gta Length	Represent the length of a gta for a particular STADIG Code.	Range: 1,15

You can perform add, edit, or delete tasks on VSTPConfigurationCAT2 IMSIs page.

Adding a CAT2 IMSI

Perform the following steps to configure a new CAT2 IMSI:

1. Click Insert.

   Note:

   The new CAT2 IMSI must have a name that is unique across all CAT2 IMSIs at the SOAM. In addition, the CAT2 IMSI's IP Port combination must also be unique across all CAT2 IMSIs configured at the SOAM.
2. Enter the applicable values.
3. Click OK, Apply, or Cancel

Deleting a CAT2 IMSI

Use the following procedure to delete a CAT2 IMSI.

Note:

You cannot delete a CAT2 IMSI if it is part of the configuration of one or more Linksets.

1. Select the CAT2 IMSI to be deleted.
2. Click Delete.
3. Click OK or Cancel.