5.1.31 PPS Relays

Prepaid Short Message Service relays (PPSRELAY). This creates the PPSOPTS entries that correspond to Intelligent Network (IN) platforms.

Select the VSTP, and then Configuration, and then PPS Relays page. The page displays the fields on the PPS Relays View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-31 PPS Relays Fields

Field Description Data Input Notes
Prepaid Portablility Type Prepaid portability type. The IN platform where the incoming message is sent. Either PPT or GTA can be specified at a time.

This is a mandatory field.

Valid entry is an integer. Maximum: 32, Minimum: 1
Global Title Address Global title address. The entity address for an IN platform. Determines whether an incoming message receives PPSMS screening. Either PPT or GTA can be specified at a time. Valid entry is a hexadecimal number of upto 15 digits
Remote Signaling Point Name Defines the Remote Signaling Point name.
Routing Indicator Routing indicator. The IN platform routing indicator.
Map Set ID / MRN Set ID Set ID. The MAP set ID.
Subsystem Number The Subsystem number. Range=maximum: 255, minimum: 2

You can perform add, edit, or delete tasks on VSTP>Configuration>PPS Relays page.

Adding a PPS Relay

Perform the following steps to configure a new PPS Relay:

  1. Click Insert.

    Note:

    The PPT and GTA value must be unique across all PPS Relays at the SOAM.
  2. Enter the applicable values.
  3. Click OK, Apply, or Cancel

Editing a PPS Relay

Use this procedure to change the field values for a selected PPS Relay. (The Prepaid Portablility Type and Global Title Address fields cannot be changed.):
  1. Select the PPS Relay row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel

Deleting a PPS Relay

Use the following procedure to delete a PPS Relay.

  1. Select the PPS Relay to be deleted.
  2. Click Delete.
  3. Click OK or Cancel.