6.2.2.5 Remove DSR Configuration Data

This procedure removes the DSR configuration data.

Note:

Do not execute this step if you are going to activate PCA again on this system and you want to re-use the configuration data after re-activation.

1. Log in to the SOAM VIP GUI. Establish a GUI session on the SOAM server by using the VIP address of the SOAM server. Open the web browser and enter the URL http://<Primary_SOAM_VIP_IP_Address>
2. Log in as the guiadmin user.

   Figure 6-13 Oracle System Login

   
   

   

   
   
3. Navigate Diameter, click Configuration and click Application Route Tables.

   Select PCA-specific Application Route Table Name.

   Either click Delete to delete the entire table or click View/Edit Rules, select PCA-specific Application Route Rules and click Delete.

4. Navigate Diameter, click Configuration and click Peer Route Tables.

   Select PCA-specific Peer Route Table Name.

   Either click Delete to delete the entire table or click View/Edit Rules, select PCA-specific Peer Route Rules and click Delete.

5. Navigate Diameter, click Configuration and click Route Lists.

   Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

6. Navigate Diameter, click Configuration and click Route Groups.

   Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

7. Navigate Diameter, click Configuration and click Connections.

   Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen. PCA-specific connection includes connections to PCRFs, PCEFs, AFs, CTFs, and OCSes.

8. Navigate Diameter, click Configuration and click Peer Nodes.

   Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

9. Navigate Diameter, click Configuration and click Local Nodes.

   Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

10. Navigate Diameter, click Configuration, click Configuration Sets and then click CEX Configuration Sets.

    Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

11. Navigate Diameter, click Configuration and click CEX Parameters.

    Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

12. Navigate Diameter, click Configuration and click Application IDs.

    Select and delete the PCA-specific or the complete configuration data (as applicable) from this screen.

13. Repeat Steps 1 to 12 on all active SOAM servers.

    If this procedure fails, contact My Oracle Support for assistance.