Prerequisites

2.1 Prerequisites

Following are the pre-requisites you must have before proceeding with the installation of vSTP software with TDM support:

The eLYNX cards must be inserted to appropriate slot in the host machine. Ensure that all the eLYNX PCIe cards are visible in the lspci command output.
The firmware and bios must be up to date on the host machine or server. Refer Appendix A for updating firmware on Host using the OSA (Oracle system assistant)
The vSTP MP VM profile must be configured.

Note:
One eLynx card requires one vSTP MP.

Note:

The vSTP MP requires the following configuration: