5.1.19 MTP Screen Sets

A MTP Screen Set is an entity which are assigned to MTP Screening Rules (/vstp/mtpscrrules) and used by MTP OPC Rule type, MTP SIO Rule type, MTP DPC Rule type,MTP BLKOPC Rule type, MTP BLKDPC Rule type or MTP DSTFLD Rule type.

Select the VSTP, and then Configuration, and then MTP Screen Sets page. The page displays the fields on the MTP Screen Sets View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-19 MTP Screen Sets Fields

Fields Description Data Input Notes
Mtp Screen Set Name Name for the VSTP MTP Screen Set, which must be unique within the VSTP site.

This is a mandatory field.

Valid screen set names are strings between one and 8 characters, inclusive. Valid characters are alphanumeric. The screensetname must contain at least one alpha and must not start with a digit.
NSFI The NSFI defines the next screening category that is used in the gateway screening process,or it indicates that the gateway screening process should stop. Range=Dpc,Opc,Sio,BlkOpc,BlkDpc
Next Scr Rule Group Name Allowed next screening rule group name.

This is a mandatory field.

Range= 1 alphabetic character followed by up to 7 alphanumeric characters.

You can perform add, edit, or delete tasks on VSTP>Configuration>MTP Screen Sets page.

Adding a MTP Screen Set

Perform the following steps to configure a new MTP Screen Set:

  1. Click Insert.

    Note:

    The MTP Screen Set name must be unique across all MTP Screen Sets at the SOAM.
  2. Enter the applicable values.
  3. Click OK, Apply, or Cancel

Editing a MTP Screen Set

Use this procedure to change the field values for a selected MTP Screen Set. (The MTP Screen Set Name field cannot be changed.):
  1. Select the MTP Screen Set row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel

Deleting a MTP Screen Set

Use the following procedure to delete a MTP Screen Set.

Note:

If the MTP Screen Set is part of the configuration of one or more MTP Selector (/vstp/mtpselectors) and MTP OPC Rule (/vstp/mtpopcrules) and/or MTP SIO Rule (/vstp/mtpsiorules) and/or MTP DPC Rule and/or MTP BLKOPC Rule and/or MTP BLKDPC Rule and/or MTP DSTFLD Rule, the MTP Screen Set must first be removed from the MTP Selector (/vstp/mtpselectors) and MTP OPC Rule (/vstp/mtpopcrules) and/or MTP SIO Rule (/vstp/mtpsiorules) and/or MTP DPC Rule and/or MTP BLKOPC Rule and/or MTP BLKDPC Rule and/or MTP DSTFLD Rule.
  1. Select the MTP Screen Set to be deleted.
  2. Click Delete.
  3. Click OK or Cancel.