3.19.192 70435 - Vstp Dynamic learning Profile Table Full
- Event Group
- vSTP
- Description
-
The dynamic-learning code raises the alarm when the profile count reaches the fixed limit (50K) and clears after aged entries reduce the count. Aging is governed by the configured aging value; a zero/None value prevents the age-removal path. Aging Timer is evaluated in hours.
- Severity
- Major
- Instance
- None
- HA Score
- Normal
- OID
- VstpVlrDynProfileTableFull
Recovery
- Confirm dynamic learning is in use and inspect the profile-table count, learning mode, and configured AgingTimer through approved GUI/MMI procedures.
- Aging can be used to reduce the count. To review or change aging, navigate to vSTP, Configuration, and SFAPP Options. Select the single SFAPP Options row and click Edit. Set AgingTimer to change-approved value, then click OK or Apply and reopen the row to confirm it saved. The supported values are None or 1–65535; use a non-None value when automatic aging is required.
- If aging is configured, allow the product’s aging process to remove eligible entries and verify the alarm clear once the count falls below the limit.
- If aging is disabled or entries do not age out, review the configuration and operational need through change control.
- It is recommended to contact My Oracle Support for assistance, if needed.