4.1 Pre-activation Health Check

This procedure is used to determine the health and status of the network and servers. This must be executed at the start of every maintenance window.

Note:

The Health Check procedure below is the same as the Health Check procedure described in Section when preparing for feature activation, but it is repeated here to emphasize that it is being re-executed if Section was performed outside the maintenance window.

This procedure provides steps to perform needed health checks.

Check off () each step as it is completed. Boxes have been provided for this purpose under each step number.

If this procedure fails, contact My Oracle Support (MOS) and ask for assistance.

Table 4-1 Pre-activation Health Check

Steps Procedure Description
1. img/icon.png SOAM VIP GUI : Login Establish a GUI session on the SOAM server by using the VIP address of the SOAM server. Open the web browser and enter a URL of:http://<Primary_SOAM_VIP_IP_Address>Login as the guiadmin user:
2. img/icon.png SOAM VIP GUI : Verify FABR folder is not present Under Main Menu , verify the FABR folder is NOT present.
3. img/icon.png NOAM VIP GUI : Login Establish a GUI session on the NOAM server by using the VIP address of the NOAM server. Open the web browser and enter a URL of: http://<Primary_NOAM_VIP_IP_Address>Login as the guiadmin user:
4. img/icon.png NOAM VIP GUI : Verify server status Navigate to Status & Manage -> Server . Verify all Server Status is Normal (Norm) for: Alarm (Alm), Database (DB), Replication Status, and Processes (Proc). Do not proceed to feature activation if any of the above states are not Norm. If any of these are not Norm, corrective action should be taken to restore the non-Norm status to Norm before proceeding with the feature activation. If the Alarm (Alm) status is not Norm but only Minor alarms are present, it is acceptable to proceed with the feature activation. If there are Major or Critical alarms present, these alarms should be analyzed before proceeding with the feature activation. The activation may be able to proceed in the presence of certain Major or Critical alarms. Contact for assistance as necessary.
5. img/icon.png NOAM VIP GUI : Verify server configuration Navigate to Configuration -> Server Groups . Verify the configuration data is correct for your network.
6. img/icon.png NOAM VIP GUI : Log current alarms Navigate to Alarms & Events -> View Active . Click Report . Save or Print this report to keep copies for future reference.