3.1 System Topology Check

This procedure verifies system topology. Check off each step as it is completed. Boxes have been provided for this purpose under each step number. If this procedure fails, contact My Oracle Support (MOS) and ask for assistance.

Table 3-1 Pre-Feature Activation Overview

Step No.#	Procedure	Description
1	NOAM VIP GUI : Login	Establish a GUI session on the NOAM server by using the VIP address of the NOAM server. Open the web browser and enter a URL of: http://<Primary_NOAM_VIP_IP_Address> Login as the guiadmin user:
2	NOAM VIP GUI : Verify network configuration data	Navigate to Configuration -> Networking -> Networks. Select the site network element tab: Click Report. Verify the configuration data is correct for your network. Save or Print this report to keep copies for future reference.
3	NOAM VIP GUI : Verify server configuration	Navigate to Configuration -> Server Groups . Click Report . Verify the configuration data is correct for your network. Save or Print this report to keep copies for future reference.
4	Analyze and plan DA-MP restart sequence	Analyze system topology and plan for any DA-MPs, which will be out-of-service during the feature activation sequence. Analyze system topology gathered in Steps 2 and 3. Determine exact sequence which DA-MP servers will be restarted (with the expected out-of-service periods). Note: It is recommended that no more than 50% of the MPs be restarted at once.